2014 Champbell Hausfield 80 gallon compressor, It Works! Kinda
- Thread starter pontiacgp
- Start date
- Status
As little as possible if any at all. Don't forget to get it sent to a shop for a week turn around that will turn into two months.geeeese, how much work do you guys expect me to do on my compressor?....
Make sure you don't get it to the machine shop before your week's vacation. Wouldn't want to have to reassemble it on your time off, better to do it at midnight, but not too close to "before work" time.
Better yet, have the machine shop do the work and then order the parts separately.
the motor I bought stopped working so I checked a few things and it looks like this is a rebuilt motor, bottom end looks clean. I'm going to try new plugs in it today and see what the scope reads.......
I thought about that, I think I will contact the member who painted the cover for his air cleaner so I will do the job properly.....
Time for a serious question....I finally got around to picking all the pex lines and fittings to set the air lines in the barn. My son set up a paint room so I had to get my *ss in gear. Here's the question, I have the 10/2 wiring going to a 2 pole breaker with the bare wire going to the neutral bar. Hit the switch and no go. I pull out my multi tool and I have power on both line right to the motor. I bypass the switch and still nothing. I grab my extension for the welder and jamb the wires into the docket. The motor fires up. WTF am I missing, I'm no sparky when it comes to electricity but I do now how to follow diagrams...
- Status
