78 Grand Prix project

Status
Not open for further replies.
I said piss on the pipe idea. I have zero patience and it was taking too long to cut with my tired *ss sawzall. Nonetheless, I got them installed. That Energy Suspension grease is a SOB to clean off your hands btw. It's like friggin guerrilla snot or something.

1978GrandPrix186.jpg
 
I used various old sockets to prevent the arm from collapsing the arm when installing the bushings i did put them in the freezer for a few hours, it was nice using the press at the shop though... 😀 I went ahead and powdercoated mine silver though....
 
thats how i replaced the lowers on my s10
 
Its all a learning process 😀 coming out nicely.i opted to buy a bushing remover/installer from hnr. Parts and stuff.this tool i cannot elaborate enough on! :mrgreen: works great an for 90.00 i highly recomend it to anyone doing this suspension work on a gbody.i wanted to ask you where you picked up the lil red plugs/caps for your steering box and spindles?have been wanting to get some,but haven't been able to locate some?,thanks and carry on.
 
"I said piss on the pipe idea" - HA HA. I have a lot of patience so I fashioned some really nice spacers that I keep in the box with the big "C" clamp. I used a cut-off wheel to cut the pipe up and they fit right over the bushings. I tried using PVC pipe and while it worked, they bent somewhat and I was afraid they would shatter and hurt me. Those parts look better than new! Good work.
 
L.A.X-RATED said:
Its all a learning process 😀 coming out nicely.i opted to buy a bushing remover/installer from hnr. Parts and stuff.this tool i cannot elaborate enough on! :mrgreen: works great an for 90.00 i highly recomend it to anyone doing this suspension work on a gbody.i wanted to ask you where you picked up the lil red plugs/caps for your steering box and spindles?have been wanting to get some,but haven't been able to locate some?,thanks and carry on.

Carry on aye aye sir :lol:

I don't even remember where I got the ones for the steering box because they were laying around. I've since used a few .18 cent corks from a hardware store instead so they won't pop out. The spindles already came with them. If you know any wine drinkers, those corks are good for plugging trans dipstick holes.
 
Bonnewagon said:
"I said piss on the pipe idea" - HA HA. I have a lot of patience so I fashioned some really nice spacers that I keep in the box with the big "C" clamp. I used a cut-off wheel to cut the pipe up and they fit right over the bushings. I tried using PVC pipe and while it worked, they bent somewhat and I was afraid they would shatter and hurt me. Those parts look better than new! Good work.

The pipe would have worked great. My old Milwaukee sawzall (not Old Milwaukee beer :lol: ) has been in service since the 90's and she's seen better days. Add cheap chinesium HF blades and the results are nil.

I don't think I have one of my uppers seated squarely though. When I go to tighten the cross shaft bolt, the bushing in the forward end pushes outward to about a 1/8" gap and it doesn't seat completely. I don't want to crank on it anymore until I get a better look at it.
 
G-Body_Vet said:
youngdeezy said:
those arms came out nice

Thanks. The KBS Coating I'm using is supposed to be satin black. I didn't think the uppers looked good enough so I smoothed them out some more, resprayed them in gloss black and added some clear. Here's what it looks like now. I just focused on the flat areas, not so much anywhere else.

1978GrandPrix183.jpg

1978GrandPrix184.jpg
this is what im trying to do to my malibu and between work and sleep and no other transpo to get to my car(its at a storage facility)i cant get n e thing done lol...SOON i will have my front end lookin like urs! NICE WORK!!!
 
kuruption109 said:
this is what im trying to do to my malibu and between work and sleep and no other transpo to get to my car(its at a storage facility)i cant get n e thing done lol...SOON i will have my front end lookin like urs! NICE WORK!!!

Thanks I appreciate it. I know what you mean being stretched for time too. My daughter lives with me now and I feel like I haven't had a break since.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor