98~05 Blazer brake upgrade! DONE!

[V6UnderPressure]

Yes, since I am anal when it comes to my cars, I couldn't just leave the plastic cut off ABS connector sitting there. I had a fellow Buick member make these for me after I provided a drawing for him. Plate looks nice and clean, even though you won't see it, I'm glad I did it.

 

[Burnhard]

Looks good. I would not of left the holes open, may be there is a market for them?

 

[V6UnderPressure]

Looks good. I would not of left the holes open, may be there is a market for them?

Which holes are you referring to? I put gasket maker on the one side, and it seals the entire opening completely.

 

[V6UnderPressure]

By the way, in case anyone wanted to upgrade to a 13" rotor and tri-power caliper for the blazer spindle, here you go:

http://www.summitracing.com/parts/SSB-A117-9/

 

[Lowproelco]

By the way, in case anyone wanted to upgrade to a 13" rotor and tri-power caliper for the blazer spindle, here you go:

http://www.summitracing.com/parts/SSB-A117-9/

bro you can do it for a fraction of that price with some c6 rotors and calipers or ls1 calipers from a camaro

just talk to skip he can get ya what you need.. Lscustoms

 

[V6UnderPressure]

By the way, in case anyone wanted to upgrade to a 13" rotor and tri-power caliper for the blazer spindle, here you go:

http://www.summitracing.com/parts/SSB-A117-9/

bro you can do it for a fraction of that price with some c6 rotors and calipers or ls1 calipers from a camaro

just talk to skip he can get ya what you need.. Lscustoms

What size rotor?

 

[Lowproelco]

By the way, in case anyone wanted to upgrade to a 13" rotor and tri-power caliper for the blazer spindle, here you go:

http://www.summitracing.com/parts/SSB-A117-9/

bro you can do it for a fraction of that price with some c6 rotors and calipers or ls1 calipers from a camaro

just talk to skip he can get ya what you need.. Lscustoms

What size rotor?

13.9 z06 rotor

 

[V6UnderPressure]

Which adapter are you using for the brake caliper? I am assuming you are running blazer spindles correct?

 

[V6UnderPressure]

Which adapter are you using for the brake caliper? I am assuming you are running blazer spindles correct?

I'd imagine that this would be the bracket I need?

http://www.flynbye.com/catalog/i257.html

After that, would the rotor just slide right on the blazer hub with no issues with location of the rotor in regards to the caliper?

 

[Lowproelco]

Which adapter are you using for the brake caliper? I am assuming you are running blazer spindles correct?

I'd imagine that this would be the bracket I need?

http://www.flynbye.com/catalog/i257.html

After that, would the rotor just slide right on the blazer hub with no issues with location of the rotor in regards to the caliper?

Looks like the one I'm using but not sure.... I'm using the Kore3 set up.. has the brackets like that but your also gonna need the pab's that is what bolts to the adapters and what your calipers bolt too... So to make it complete u need the blazer spindles and hubs.... The kore 3 brackets or equivalent, the pab and either ls1 calipers or corrvette calipers.. zo6 rotors and finally pads and the shim kit.... And yes with the bracket and other stuff the rotors slde right on and bolt up....