Bilstein or KYB shocks with moog springs for my G body?

[BMR Suspension]

For the lowered option, I assume, since you mention Bell Techs. I went to the BMR site and their lowering kit uses these Bilstein part numbers. T.C., do these accommodate as much as a 3" drop?

The Bilsteins are good down to a 2" Drop. Below that and you would need a shorter shock

 

[Longroof79]

Thanks T.C.
Nice 911 Carrera clone...nicely done. I also like your 914-6 race car. I used to own a '74 914 2.0. a few years ago.. I sold it regretfully. The guy that bought it from the guy I sold it to works for VW. The car was ultimately shipped back to Germany where he's from.
It didn't have Bilsteins in it, but the new owner was adding Bilsteins and front and rear swaybars.

Sorry guys, I didn't mean to turn this into a Porsche thread...

 

[pontiacgp]

The Bilsteins are good down to a 2" Drop. Below that and you would need a shorter shock

that is true but depending on the length of the rear spring the short Bilstein may be needed so the spring does not pop out when jacking the car up as was in my case.