cam help

[mugzi]

when changin from a stock cam to an aftermarket cam with stock heads. wat are somethings that i will need to change or consider in this swap. its a sbc 350 80-85.

 

[Stoopud]

New timing, gaskets, lifters. Make sure the lift is not too high, you may need new springs or machine work. you do not want binding or contact between the piston and the valves. I recommend roller cam if possible.

 

[85 Cutlass Brougham]

Choosing a cam that is matched to the flow of the heads in question, and the compression ratio is one of the biggest concerns. What size is the engine, and what is it from?