Edelbrock carb with 200-4r Transmission

Status
Not open for further replies.

cbenson

Not-quite-so-new-guy
Apr 22, 2020
33
1
8
I am wanting to replace the Quadrajet carburetor with a Edelbrock 600,,,I know I need a adapter for the tv cable on the transmission but I dont know what kind nor what kind of throttle bracket I need and I will also be using a spacer because I am trying to keep the stock intake...Any help would be nice and thanks in advance
1986 Monte Carlo LS 305
 

83MonteCarloSS

Greasemonkey
Oct 5, 2015
149
252
63
I am wanting to replace the Quadrajet carburetor with a Edelbrock 600,,,I know I need a adapter for the tv cable on the transmission but I dont know what kind nor what kind of throttle bracket I need and I will also be using a spacer because I am trying to keep the stock intake...Any help would be nice and thanks in advance
1986 Monte Carlo LS 305
I have an Edelbrock with a 200-4r and am thinking about going back to the quadrajet. I have had good luck with the Edelbrock carbs but if you start watching videos on how to tune the quadrajet carbs you might change your mind about swapping. If you want to swap and get rid of the computer you will have to get a hei distributor that isn't computer controlled, you will need a squarebore to spreadbore adapter to mate the new carb to the stock manifold, and the TV cable corrector. Here's a link for the TV corrector https://www.summitracing.com/parts/sox-as5-05k
 
  • Like
Reactions: 1 user

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,990
113
Socialist NY
  • Agree
  • Like
Reactions: 3 users

Longroof79

Rocket Powered Basset Hound
G-Body of the Month
Oct 14, 2008
12,156
9,762
113
Gainesville, Fl
I would personally stick with the Q-jet. I had gone back to a Q-jet after using a Holley for many years. No regrets. Once you have it properly rebuild, you won't be disappointed.
 
  • Like
  • Agree
Reactions: 2 users

L92 OLDS

Comic Book Super Hero
Mar 30, 2012
2,872
3,050
113
West Michigan
The Q jet is a better carb. I tried an Edelbroke on an Olds 350 and could never match the performance, driveability or economy of a Q Jet. I also had flooding issues with the Edelbroke. I agree with the others that you should re build the Q jet or find a good Q jet replacement for your 305. I cringe when I watch this ignorant PN video comparing an Edelbrock to a Q-Jet. "They don't really have that set CFM that you think of"....That is the beauty of the Q-Jet design! Clearly they are being paid to advertise for Edelbroke. Get this book and re build it yourself. You will have glad you did. Oh yea....Welcome to the forum. Looks like your very first post.

1587644866686.png







 
  • Like
Reactions: 2 users

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,990
113
Socialist NY

stuckincincy

Apprentice
Sep 26, 2011
71
51
18
Greater Cincinnati area
It's not just about the pivot arm length, the distance from the cable bracket and the linkage matters. Bowtie Overdrives makes a nice setup. A little bit spendy but their geometry is correct.

 
  • Like
Reactions: 2 users

cbenson

Not-quite-so-new-guy
Apr 22, 2020
33
1
8
Replace the carb with a quality rebuilt one

Unless you want to replace the distributor, and install a lock up kit for the trans,

Reach out to techg8 on this site


I don't plan on replacing the distributor,,,is that something I need to do?
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor