In search of a straighter radiator hose for bbc

[mc1984ss]

My lack of vacuum is the reason I'm going to manual brakes. Dave recommended I try a master with 7/8" bore. After hearing your success I'm confident I'll be happy with the swap. I also see you put in a 45 degree fitting for the hose from the intake to the water pump. I tried every hose but with my intake they never fit properly and always had a slight kink. I was always going to put in a 45 and now I see it will work

 

[GuysMonteSS]

Yeah,the 45 degree fitting sure made it a lot easier to get that little hose in place.
IIRC,it is made by Performance Stainless Steel;

Performance Stainless...

Performance guarantees its 304 stainless steel parts will look great, fit right and are highly corrosion resistant.

performancesst.com

Guy

 

[Michael Watts]

It could be close to a second gen Camaro .

 

[denny]

Gates #20823

I sometimes trim a little to get the fit I'm after

View attachment 149272

just ordered a gates 20823. would also like to replace the bottom ribbed style hose with a smooth one. 81 malibu sb. just don't like the ribbed style. anybody have a number for a smooth bottom hose? thanks. Denny

 

[monte olrac]

you just wanted to show of some engine p*rn!

I actually prefer the molded hose over a straight hose but I also need the clearance for my vacuum pump and nitrous fuel system.

View attachment 149274

 

[pontiacgp]

I actually prefer the molded hose over a straight hose but I also need the clearance for my vacuum pump and nitrous fuel system.

View attachment 149274

you need to put a warning with your pictures, "Sunglasses are Recommended".... 😍

 

[83StreetMachine]

just ordered a gates 20823. would also like to replace the bottom ribbed style hose with a smooth one. 81 malibu sb. just don't like the ribbed style. anybody have a number for a smooth bottom hose? thanks. Denny

I'm pretty sure you can run a stock Sbc lower hose. You may need to trim it a little.

ACDelco 24132L

Gates 21324

Dayco 71131

 

[denny]

I'm pretty sure you can run a stock Sbc lower hose. You may need to trim it a little.

ACDelco 24132L

Gates 21324

Dayco 71131

thanks. yes a sbc. to trim would be ok.

 

[mc1984ss]

thanks. yes a sbc. to trim would be ok.

I do not have a part number but I can verify the stock sbc hose works just fine!