I know this subject has been gone over before a million times. I need some clarification though from someone who has actually done it and knows what im gonna be looking at with it apart. I've read through 25+ threads asking some of the same questions I had originally. I have the tools to complete the job except pivot pin remover and lock plate tool but I can pick them up easily. Anyways my question is while I'm in there is there anything I should replace? I'd like to only have to do this once! The tilt column is loose but not locking up like I've seen in some threads. Just floppy. It will still lock in place but with some up and down movement. Just trying to get an idea for how I should tackle this job before I even start. If I need a kit like the one pictured on Amazon, or the kit like on mikesmontes? Won't necessarily buy either of those but for reference they are fine for someone to provide some feedback. I know some people have said you just need to Loctite the 4 bolts. I just want to ensure I'm replacing sh*t that might also be bad or worn out. I want to do it once and have firm, crisp response from the column after. Any help would be greatly appreciated fella's. Thanks