Take a wider picture showing the source of that wire.
I don't think the O2 sensor wire would come from the top of the engine, it would have to cross the manifold and eventually get cooked. I would look for the wire coming from a loom on the firewall or the inner fender.
Take a wider picture showing the source of that wire.
I don't think the O2 sensor wire would come from the top of the engine, it would have to cross the manifold and eventually get cooked. I would look for the wire coming from a loom on the firewall or the inner fender.
The wire seems to run behind the distributor i had used electric tape to secure the wire harness and this was taped toward the front of the engine thats why I couldn't find it. Its the only wire I see that could be it how can I test it to check if Its sending signal/power to see of its actually working. I'm still waiting on the sensor.