Olds 307 emissions crap removal

[DeltaDevil88]

Looking to clean up the look of my engine bay so the emissions stuff gotta go (Live in TX so it wont get tested) Need a write up on what to remove and how to:

Thanks in advance guys.

 

[DeltaDevil88]

Forgot to add want to keep the CCC.........Is it ok to remove the smog pump and charcoal canister?

 

[two90west]

yeah you can take both of those off, just get cut off plugs for your carb because some of the lines from cannister go to the car. check out my 83 regal buildhttp://gbodyforum.com/viewtopic.ph ... 14#p265588

 

[two90west]

the guy to ask is joemadrum, just type his name in the search box on here and send him a pm im sure he can help because he just took all of his emissions crap off

 

[85CutlassSalonRyder]

viewtopic.php?f=19&t=31841
This is how I did mines... The Super Budget Way! :wink:

 

[DeltaDevil88]

What size plugs do I need after removal??? and where can I purchase them at???

 

[DoubleV]

What size plugs do I need after removal??? and where can I purchase them at???

1/4" pipe plugs. Most hardware stores should have them. Get them in brass if you can, but you don't need too.

 

[Volumeshooter]

http://gbodyforum.com/viewtopic.php?f=19&t=31841
This is how I did mines... The Super Budget Way! :wink:

Mine is even more super budget, previous owner cut tubes and crimped them with pliers. It works but looks like sh*t.

 

[85CutlassSalonRyder]

Thats what I did at first, but decided to clean it up a bit.

 

[DeltaDevil88]

What size plugs do I need after removal??? and where can I purchase them at???

1/4" pipe plugs. Most hardware stores should have them. Get them in brass if you can, but you don't need too.

Thanks I did a online search and seems like most come in a hex fitting.......Will those works or is it a round fitting???