Pay it Forward Thread/ Click it or miss out!

[85CutlassSalonRyder]

Ok, here goes............ I have an 3/4 complete olds 307 (casting numbers are :3161-5A) minus water pump, starter, carb, and manifolds. If anyone is interested, let me know! Like "LS" said it's completly free, just give me time for the shipping cost.

 

[LSCustoms]

im interested in the read disk swap brackets. please let me know if you still have them and let me know if you will ship to canada.

edit: just reread your post. im in the process of building my rear end. nothing fancy 7.5 with 28 spline, 3:73 gears and an eaton posi. this will help me alot. i was gonna do a disk swap in the future but if i get this i can put it on while im swapping in the 28 spline axles. im a little tight on money(im the only one working and my gf is just going to collage to her nursing and we also have a 3 year old). but i do have ALOT of parts i can go through and see what i dont need and i can put them up on here.so please let me know.

thanks;

vlad

i dont know how to ship to Canada, but i will check and see if this is feasible, can you find 97-older LT1 style disc brakes? so that you can use these?

 

[LSCustoms]

Ok, here goes............ I have an 3/4 complete olds 307 (casting numbers are :3161-5A) minus water pump, starter, carb, and manifolds. If anyone is interested, let me know! Like "LS" said it's completly free, just give me time for the shipping cost.

sweet man! for something like that, i would limit to pick up and dang motor can be pricey to ship brotha...

 

[vladj]

im interested in the read disk swap brackets. please let me know if you still have them and let me know if you will ship to canada.

edit: just reread your post. im in the process of building my rear end. nothing fancy 7.5 with 28 spline, 3:73 gears and an eaton posi. this will help me alot. i was gonna do a disk swap in the future but if i get this i can put it on while im swapping in the 28 spline axles. im a little tight on money(im the only one working and my gf is just going to collage to her nursing and we also have a 3 year old). but i do have ALOT of parts i can go through and see what i dont need and i can put them up on here.so please let me know.

thanks;

vlad

i dont know how to ship to Canada, but i will check and see if this is feasible, can you find 97-older LT1 style disc brakes? so that you can use these?

yep i can find some at a junk yard here. and if not there is a guy here that parts out camaros,firebirds and trans am's but hes a bit pricey. if i cant find any at the junk yards ill see if i can make a deal with him but more then likely the junk yards should have them. to ship to canada your cheapest way will be usps.

thanks;

vlad

 

[JBreu]

will those springs help or hurt wheel hop in your opinion? I still have air shocks so I know thats part of the problem but there brand new from before I got into wanting to go fast...

zThey will do nothing for your wheel hop..you will need anti-hop bars, which I don't like, or an upgraded set of upper/lower control arms.....check out UMI Performance.

 

[85CutlassSalonRyder]

Ok, here goes............ I have an 3/4 complete olds 307 (casting numbers are :3161-5A) minus water pump, starter, carb, and manifolds. If anyone is interested, let me know! Like "LS" said it's completly free, just give me time for the shipping cost.

sweet man! for something like that, i would limit to pick up and dang motor can be pricey to ship brotha...

Yeah, you're right! I meant parting it out, unless whoever is interested in come picking it up.

 

[richp85elco]

will those springs help or hurt wheel hop in your opinion? I still have air shocks so I know thats part of the problem but there brand new from before I got into wanting to go fast...

zThey will do nothing for your wheel hop..you will need anti-hop bars, which I don't like, or an upgraded set of upper/lower control arms.....check out UMI Performance.

I dont even have wheel hop yet I havnt driven the car I'm just planning for it... I will be paying the registration tomorrow and then i need to get a smog. Thanks tho ill check out umi

 

[LSCustoms]

will those springs help or hurt wheel hop in your opinion? I still have air shocks so I know thats part of the problem but there brand new from before I got into wanting to go fast...

zThey will do nothing for your wheel hop..you will need anti-hop bars, which I don't like, or an upgraded set of upper/lower control arms.....check out UMI Performance.

I dont even have wheel hop yet I havnt driven the car I'm just planning for it... I will be paying the registration tomorrow and then i need to get a smog. Thanks tho ill check out umi

car did a burn out, i mean, accidently, with them on there, didnt seem any different then stock, just higher, the antihop bar will prob work, but if you need to raise the rear, should speak up bruh

 

[80ELCAMINOFLAKE]

Lmao

Now i know what u were talking about when we were texting......Got it brah!!!! :wink:


But thanks for including me in the batch, And yes i do need to pick up my game, but Im all new to this gbody car built stuff, im learning as i go...Like my front suspension, Peeps on here drilled on me about it and i fell bad not doing that first before i drop in that rear end... i do understand that its nessasary, but theres no one here that can be there side to side with me to tell me how to do it or what im doing wrong, But i know that i will be doing it when the times right and the moneys right..If these helps im going to give Kuruption109 so chrome mirrors i have here....lmao...im all abotu giving too

I understand where u coming from and it being hard in the streets with cash flow...
Its very rough right know with my little one in day care!! That sh*t is soooooooo EXPENSIVE!!! thats where all my hard working checks are going every two weeks...And my 8yrs school tuition for being in private school. ( i just want the best for them and my family) FAMILY COMES FIRST!!!! (ALWAYS)!!!



This is a perfect thread Skip.....We must all stick together to get these beautiful gbodys on the road and looking clean..Mad Props!!


I LOVE YOU GUYS MAN!!!!!!!!!!!

 

[kornball426]

I'm broke as a joke too bad I don't need those... If you had a complete wire harness for 1970-1981 F-bodies you were giving away I'd snap it up in a second. Mine is more fried than the Colonels original recipe and more butchered than the chickens he made it from. :lol:

Props for doing this though, it's very nice and generous of you.

Edit: I do plan to upgrade to rear discs... But again it's F body I don't think those mounts would work. And even if I got the mounts, I wouldn't be able to afford the calipers or rotors anyway. :lol: