Pulleys?

[Henry88]

I have an 85 Regal with a V6 and I'm going to swap to a chevy 350 that I had before I got the car.Can I use the Buicks pulleys and if not what's a good pulley kit with A/C for a broke mans budget. I dont wont a kit with a water pump etc. Have that.
Thanks guys. 8)

 

[LS1GN]

231 V6 stuff will not work without lots of fabrication. Probably easiest to get a complete set from a junkyard. Any small block or even 4.3 V6 will work. You know that a 4.3 is simply a small block chevy with two cylinders knocked off.

The LT1 has a reverse coolant flow so beware.

 

[Henry88]

Thanks

 

[mebe007]

what im using
http://www.cfrperformance.com/CHEVY_SMA ... 04-kit.htm

 

[Henry88]

what im using
http://www.cfrperformance.com/CHEVY_SMA ... 04-kit.htm

Can I run my stock A/C with this kit and my alt is on the driver side will that be a problem :?:

 

[mebe007]

Call and ask. They are great people to deal with. With sbc the alt will be on the passenger side generally. Then get a ac brackey for the Chevy drivers side