BUILD THREAD RealDealRegal Small tire Drag build

[64nailhead]

Looks like progress. I'm using a similar spindle from TRZ. Be advised, they will lower the car a fair amount.

Keep the updates coming. Despite my lack of responses, I'm watching everything you're posting!

 

[shark3226]

Looks like progress. I'm using a similar spindle from TRZ. Be advised, they will lower the car a fair amount.

Keep the updates coming. Despite my lack of responses, I'm watching everything you're posting!

I got the stock height spindles. I was told by multiple people not to run drop spindles. It makes the car just too low. 2025 is going to be a good year! Im getting so pumped! Have a great New Years!

 

[64nailhead]

I got the stock height spindles.

A member here supplied me with uppers and 1.5" drop spindles. I'm using the factory lower and it's low. I spoke to TRZ this past week about purchasing the lowers. Their site says that installing the lowers, by themselves, will drop the front farther which I don't want. So I'm going to stick with the stock lowers and work hard over the winter getting the bump steer set much better than I have it now. I should mention that I'm happy with my front ride height presently.

Good luck and keep the faith!

Jim

 

[shark3226]

A member here supplied me with uppers and 1.5" drop spindles. I'm using the factory lower and it's low. I spoke to TRZ this past week about purchasing the lowers. Their site says that installing the lowers, by themselves, will drop the front farther which I don't want. So I'm going to stick with the stock lowers and work hard over the winter getting the bump steer set much better than I have it now. I should mention that I'm happy with my front ride height presently.

Good luck and keep the faith!

Jim

I have begun to turn away side work as I have the ITCH to get back on the build. Updates soon. Hope your getting that bump steer dialed in? Ill be interested what mine will be like once I get the rack and front end together.