true dual exhaust pictures

[steveomino]

i have a 86 caballero and i want to put dual 2 1/4 or 2 1/2 exhaust on it with cut outs i have a welder and the skills to do it i would just like to see some detailed pictures of how people have routed the pipes and where the mufflers have been placed i purchased a universal kit from flowmaster with a bunch of bends and pipes to make the exhaust up any pictures would greatly help.

 

[dirtywhiteboy]

your factory trans crossmember is your only real problem, I will see if I have any pics that may help.

 

[dan2286]

Hope this helps, its for a g body

http://www.pypesexhaust.com/sys-mc.html

 

[dirtywhiteboy]

this is best I have.......still a work in progress

 

[1985Diablo]

Tru Dual exhaust G-Body

Jegs has a reasonable cross member. Check the catalog/website.

 

[83Cutlass2181]

this is the best i have:
flowtech headers, no cats, borla mufflers, tips exit at each side after the rear tires at a 45 degree angle.

 

[n8dogg]

you can run the 2 pipes together down the pass side and eliminate the crossmember problem. I have my 85 grand prix done this way and it works great.

 

[broc7471]

I put in the jegster dual exhaust crossmember
http://www.jegs.com/p/Jegster/Jegster-D ... 1/10002/-1
I'm going to run 3" and flowmaster super 44's and dump it out infront of the rear wheels.

 

[SLICK79WGN]

this is the best i have:
flowtech headers, no cats, borla mufflers, tips exit at each side after the rear tires at a 45 degree angle.

that is the first non leaf spring car I have seen with traction bars

 

[pontiacgp]

that is the first non leaf spring car I have seen with traction bars

it's not the first one for me but I still get a good chuckle out of it... :lol:

what I don't see tho is an X or a H in the pipes..or cats ..and the headers arn't wrapped....