Turbo Century - Free/Curb Alert? in San Fransisco, CA

[fleming442]

Wire retainer
If that's your engine, change that air filter before it destroys your car.

 

[CrammerGram69]

Wire retainer
If that's your engine, change that air filter before it destroys your car.

No sir not my engine. Just used as an Example picture. I know of the things those do. Haha.

*update* i didn't find anything. any recommendations?

 

[83StreetMachine]

I pretty sure I have a stock hei wire retainer. I'll check when I get home from work this evening.

You can have it, just pay shipping.

 

[CrammerGram69]

I pretty sure I have a stock hei wire retainer. I'll check when I get home from work this evening.

You can have it, just pay shipping.

I should ask if they fit both V6 & V8? (Mines a V6) 🙂
P.s Sorry to hi-jack the post and ask about parts lol

 

[fleming442]

They really don't have much function. It's more of a restoration/appearance piece; the wires aren't going anywhere.

 

[69hurstolds]

No sir not my engine. Just used as an Example picture. I know of the things those do. Haha.

*update* i didn't find anything. any recommendations?

Really? Did you look?

Fits 4, 6 or 8 cyl. Pick your holes.

GM p/n 12004716. You don't have to run one, unless you want the look or to keep the wires separated and in order when you take the cap off. The replacement Delco wires later on don't even have the retainer tops on the connectors as they found out they didn't need them. But that's of no concern really.

But you couldn't walk through the internet without tripping over them.

ebay:
https://rover.ebay.com/rover/1/711-...0001&campid=5335822911&icep_item=373080093428

Summit:

Spark Plug Wire Retainers - HEI Distributor Type - Free Shipping on Orders Over $99 at Summit Racing

Find Spark Plug Wire Retainers HEI Distributor Type and get Free Shipping on Orders Over $99 at Summit Racing!

www.summitracing.com

p/n ECH202 from NAPA.

etc....

 

[CrammerGram69]

They really don't have much function. It's more of a restoration/appearance piece; the wires aren't going anywhere.

only reason I'm going for it. 🙂 Protect me wires.

 

[Turbo Zach]

Can we get back on topic? James do you have it running yet? Jk Front end repair looks good.

 

[CrammerGram69]

Can we get back on topic? James do you have it running yet? Jk Front end repair looks good.

Sure thing Mr. Up tight.

 

[64nailhead]

As you can see a little tap on the drive's side has bent the bumper, broke the turn signal, and buckled the grill. So I did a little face lift using spare parts. 2-3 hours of work, and it looks a little more presentable. I am still trying to find the correct parts, but this will work for now.
View attachment 158643

I almost hate to ask, but what is that gadget on the fan shroud?