turn signal issues on my 86 Cutlass

[Mark Mullen]

Hi having problems with the turn signals on the drivers side and the indicator in the dash won't flash when all the lights are on and the hazard flashers sta constanty. Could it be the turn sthe bulbs and put new signal switch in the steerng colum ,replaced the flasher ,new bulbs,replaced the fuses and still the same results any suggestions would be greatly appreciated.

 

[el corvino]

I'd either check the bulb or under the dash, on the fuse box. My 87 shows it as fuze M.

 

[el corvino]

 

[el corvino]

I guess per that it could also be fuse "i"

 

[Mark Mullen]

The fuse looks ok the problem I'm having is when I put the left turn signal on all the other lights blink but dimmer than the left signals

 

[pontiacgp]

check the grounds...

 

[el corvino]

Sounds like either you replaced one bulb with a higher lumen than the other side, or the ground on that side has slightly come loose.

 

[Mark Mullen]

check the grounds...

The grounds checked out

 

[el corvino]

wait... all the other lights as in ALL the other lights? Things that shouldn't even be blinking ALL?

 

[Mark Mullen]

Sounds like either you replaced one bulb with a higher lumen than the other side, or the ground on that side has slightly come loose.

wait... all the other lights as in ALL the other lights? Things that shouldn't even be blinking ALL?

Yeah all the turn signals and the license plate lights but not the back up lights.