Where are all the grease fittings to add grease to under a 1988 monte carlo ss

[DanC]

Anyone know where are all the grease fittings to add grease to under a 1988 monte carlo ss

 

[olds307 and 403]

The usual spots....

 

[fleming442]

Upper and lower ball joints, inner and outer tie rod ends, idler arm, and pitman arm

 

[Injectedcutty]

Upper and lower ball joints, inner and outer tie rod ends, idler arm, and pitman arm

Also, the muffler bearings...those are crucial to keep well greased up!

 

[85442/86buick]

no forgetting the driveshaft u-joints .......Depending if the u-joint has a fitting ,these 2 locations you may need to install them first. ( not all u-joints are created with the option )

 

[lilbowtie]

Google is your friend

 

[69hurstolds]

If you run over this guy at just the right angle...viola! Everything under the car is greased.

 

[pontiacgp]

[QUOTE="fleming442, post: 674505, member: 18209"]Upper and lower ball joints, inner and outer tie rod ends, idler arm, and pitman arm[/QUOTE]


he was only asking for under, not upper....

 

[pontiacgp]

don't forget what needs to be greased but has no grease nipple...

http://www.superchevy.com/how-to/wheels-tires/1512-wheel-bearing-packing-101/

 

[fleming442]

[QUOTE="fleming442, post: 674505, member: 18209"]Upper and lower ball joints, inner and outer tie rod ends, idler arm, and pitman arm

he was only asking for under, not upper....[/QUOTE]
OKAY, I GOT IT NOW.