On my 84 Cutlass, I have loosened my bolts from the Hinge to the body to adjust my door and with all the bolt loose I still can't get it to move. It looks looks like there is glue between the hinge and pillar.
This is not the original door it was put on twenty years ago by pulling the door pins using the junk yard door side hinge and factory pillar side and never adjusted the for the same reason. It sat for the last 18 years so the pins and bushings are tight but is out of adjustment.
Any ideas or suggestions , thanks
This is not the original door it was put on twenty years ago by pulling the door pins using the junk yard door side hinge and factory pillar side and never adjusted the for the same reason. It sat for the last 18 years so the pins and bushings are tight but is out of adjustment.
Any ideas or suggestions , thanks