Search results

I had the same problen in a caprice about a year back, it ended up being the power at the headlight switch I just needed to fix the wire and put in a fusible link. The odds are likely yours is the same problem since that controls all of your issues check there. Easy fix if its your problem. Hope...

The wheels on the white monte are SQ8 from S10's or sonomas. The others look like american eacing wheels.

I recently purchased a t top kit from (Mikes montes) It was made by soft seal witch metro/soft seal are the same company now. But I installed it 2weeks ago and it fits like a glove. His customer service is second to none. They shipped the same day and it only ran me $189 that included vibration...

Your bolt pattern is correct the fronts should fit fine but generally you would wana stay under 5 on the backspacing. Do you know what the offset is? Worst case, you may need to run down to the parts store and pick up some spaces for the rear.

Your pulling directly on the wire? If thats not working you may have to get closer to the latch and do the same thing. That means reaching through the wheel well and cutting it and trying it that way. :doh:

Welcome to GBF, good people and good knowledge here. Good find on the cutty. Looks real solid.

Welcome to GBF, good people and good knowledge here

You may have to remove your kick panel find the other side of the cable and be gentle with a pair of pliers. You may have to strip some of the plastic because you need to pull the actual cable.

It will be a good race. It wouldnt hurt to get a nice holley 650cfm you will notice the difference. My advice is tree him and you should stay in front.

Good old fashion delco 44's have done me well. Plus they are a little shorter (helps with the headers)

Thank you sir

We got a solid inch of ice right now and still building. MAKES FOR FUN DONUTS!!! :mrgreen:

Just curious what rear end was used in a 1979 regal t type

Re: 87 ls with differential of a v6 is that why i cant spin Dont junk it sell it and get some money back from your new engine purchase. it should sell. And dont just advance you timing set it were it should be. If your timing is off then you get plug knock thus losing power along with other...

Re: 87 ls with differential of a v6 is that why i cant spin If you get smaller gears you will notice an increase in takeoff naturally because your wheels are going to be spinning faster. But torque is whats going to make your wheels spin not hp. You need good old fashion low end torque. find...

Welcome to GFB. Im new here also, but so far seems to be alot of knowledge and nice people

Re: New to G B F Thanks guys, jbreu the gm goodmark fit it like a glove no issues at all.

Re: 87 ls with differential of a v6 is that why i cant spin Could be a couple things, Tourqe is were your power to break the tires loose comes from and a stock 305 didnt have much.. Those big wheels just make it harder for that 305! Another thing did u upgrade your brakes when went with bigger...

Hello all, long time forum user first time GBF user. I have an 88 ss t top with a 69 vette 327cid, 2inch gm goodmark hood, kandy brandywine paint.