Well---- the day is almost near to fire this thing up for the first time. I've been working on this thing chance I get since the last post. It is finally ready to fire except for some power steering issues and I still need to build the exhaust yet. Otherwise, I've about got it ready to fire up. I've spent the last couple of months finishing up loose ends in the engine bay--- mounting MSD box, fitting heater/radiator hoses, underhood wiring, building plug wires, wiring to the starter and sensors, finishing the fuel system and transmission cooler lines and wiring to the transmission. The list just goes on and on. I spent this weekend wiring inside the car. I now have my keyless entry/remote trunk wiring done. (shaved the locks and trunk key). I also spent more time wiring the digital dash. I also got the car back on the ground to see how it would sit with weight on the front end. I haven't rolled it out of the garage yet, so I'm hoping for a little drop yet. I'm gonna let it sit a year on these springs and see how it reacts. I'm almost sure it will drop some once the springs have a chance to sag out a little bit. It has been a lot of work and I'm glad it's getting near the end. Last thing to do is finish up the A/C, install the door panels, and finish rebuilding the seats. I had an upholstery shop redo the front seats and I just haven't had time to put them back together yet. I will keep everyone posted on future progress--- can't wait to post the video of it firing up. Thanks, Aaron
