1984 cutlass "Street fighter"

[jeremyandthemonte]

hey guys i am back with some work finally done to my car i got the battery mounted i have a few questions about battery grounds. so i have my battery ground from the battery to the frame. would this kit work? i know i need to have body to frame, engine to body ,then engine to frame, is that correct? http://www.jegs.com/i/Painless-Performance-Products/764/40140/10002/-1

 

[Texas82GP]

That kit looks nice and you are correct. Stock was battery to engine, engine to body, and some cars had a small lead from the battery to the body (fender). Anything more is a badly needed upgrade. Good to see you back and still working on it.

 

[565bbchevy]

Most of my grounds I made from welding cable, for my trunk mounted battery I have a 1/0 going to the frame and a #2 going to the body and up front I have two large braided straps coming off each side of the front of the engine an upgraded fire to block ground plus a few other 1/0 grounds to tie everything together I would rather have too many grounds than not enough.

 

[jeremyandthemonte]

Well guys it’s been a long time since I have been on here but life got in the way I ran into some members during my time away loved seeing all the gbodys. Here’s a little update I haven’t gotten much work done since I got a nice new truck but I got my trans pan on and the car has some how got more apart then the last time I saw it. Bit updates will be coming soon as the rush to get it done is upon me girlfriend says it needs to look like a car for me to keep it on a side note does anyone know how much fluid a th350 takes with a b&m deep pan?

 

[jeremyandthemonte]

hey guys i am back after a while been away at school but i did finally get my hands on a ls motor its a 6.0 lq9 for 500$ including all the ecu and the front assesories does anybody know what kit i need to bolt it up to my th350? i have read it will bolt right up and sometimes need a spacer?

 

[CaliWagon83]

Here’s a little update I haven’t gotten much work done since I got a nice new truck but I got my trans pan on and the car has some how got more apart then the last time I saw it.

Wait. What? I thought you just got a BRZ? Baller!

 

[jeremyandthemonte]

Wait. What? I thought you just got a BRZ? Baller!

i needed something a little more canadian friendly i sure do miss the frs tho it was a amazing car

 

[jeremyandthemonte]

Hey guys long time no see I have been caught up in life and the cutlass hit the back burner for a while I did how ever start collecting more and more for it but I also decided to do a little with my new tow I have since lowered my brand new truck yes it’s still 4x4. I will be posting more and more about my cutlass since after seeing Steve around a couple times makes me want to get my car on the road nice to be back guys miss you fellers

 

[jeremyandthemonte]

Hey guys its been maybe a year or so since i have made any post about my car but GOOD NEWS i have finally been able to drive it. first trip was out to the drag strip 300km round trip sadly car could not run due to some little issue i have yet to address on the interior but i would like to thank everyone on this forum for all your help and i am so happy to be back. there is some big plans for the car coming up in the next few months

 

[Texas82GP]

Welcome back. I was wondering about you. Congratulations on hanging on to your hot rod. Well done.