1987 Olds Pro-touring project build - Now with paint
- Thread starter FE3X CLONE
- Start date
- Status
Re: 1987 Olds Pro-touring project build *LONG*
For two views like show it was $250.
I believe they start at $180 for a single view with one paint/wheel/tire choice. If you want to see the car with more than one type of wheel, different color combinations, body modifications, etc. then the price goes up from there.
Shawn is one of THE most reasonable on price I've seen. I looked into a few others and for similar work you'd be looking at twice that amount just for a single view.
85GPLef41 said:What Melman109 said!!What does a rendering like that go for?
For two views like show it was $250.
I believe they start at $180 for a single view with one paint/wheel/tire choice. If you want to see the car with more than one type of wheel, different color combinations, body modifications, etc. then the price goes up from there.
Shawn is one of THE most reasonable on price I've seen. I looked into a few others and for similar work you'd be looking at twice that amount just for a single view.
Re: 1987 Olds Pro-touring project build *LONG*
Looking good, Andrew! Now, I got an idea of how the hood scoop will be. Get a hood, preferably rust free, dents are ok :wink: I'm zeroing in on the flares and the side skirts :wink:
Once this truck i'm doing is done (real close), I can get back on that 72 and i'll have enough room to sneak yours in there, too :wink:
Looking good, Andrew! Now, I got an idea of how the hood scoop will be. Get a hood, preferably rust free, dents are ok :wink: I'm zeroing in on the flares and the side skirts :wink:
Once this truck i'm doing is done (real close), I can get back on that 72 and i'll have enough room to sneak yours in there, too :wink:
Re: 1987 Olds Pro-touring project build *LONG*
Just found a hood on Craigslist near you Blacksheep. Doesn't look to be in too bad of shape.
It's at an auto salvage. Looks to be a fairly complete '87. They call it an '86 but it has the '87/'88 header panel.
Just found a hood on Craigslist near you Blacksheep. Doesn't look to be in too bad of shape.
It's at an auto salvage. Looks to be a fairly complete '87. They call it an '86 but it has the '87/'88 header panel.
Re: 1987 Olds Pro-touring project build *LONG*
Is the hood going to be open in front? Do you still have the W-30 hood you pictured a while back?
Edit: I went back and reread some of the beginning to answer my question about the W-30 hood, I see you'd want to keep that one!
Is the hood going to be open in front? Do you still have the W-30 hood you pictured a while back?
Edit: I went back and reread some of the beginning to answer my question about the W-30 hood, I see you'd want to keep that one!
Re: 1987 Olds Pro-touring project build *LONG*
It's going to be a cowl hood that starts at the front of the head panel. The hood will be the entire width between the two body lines in the stock hood. Those will essentially be eliminated and the edge of the cowl hood will take their place.
That will make the scoop roughly 33" wide.
I still have the W-30 hood. I'm going to paint it and install it on my brother's '81 for a wedding present. 🙂
It's going to be a cowl hood that starts at the front of the head panel. The hood will be the entire width between the two body lines in the stock hood. Those will essentially be eliminated and the edge of the cowl hood will take their place.
That will make the scoop roughly 33" wide.
I still have the W-30 hood. I'm going to paint it and install it on my brother's '81 for a wedding present. 🙂
Re: 1987 Olds Pro-touring project build *LONG*
Will it be molded in or look like bolt-on?FE3X CLONE said:
Re: 1987 Olds Pro-touring project build *LONG*
Good chance it will be made of steel and welded in. We're still working out the details :wink:
xitabl442 said:
Good chance it will be made of steel and welded in. We're still working out the details :wink:
- Status
Similar threads
