4spd conversion console?

[TURNA]

Here is my 85 Cutlass Salon 4-speed conversion with ultra rare console. at time of these photos it was a 5.0L H.O. Muncie M21 8.5 Posi. Last summer I put i na 68 455 C heads with 11inch clutch. Working on headers and exhaust this year $$$.

Reach out to dr78442 He had these on his BBO

Oldsmobile 455 headers

Selling my BBO hooker headers. The type that has one tube on each side that wraps around the frame. They are ceramic coated They have about 5000 miles on them asking $300.00. Plus the ride. Headers only no bolts or gaskets.

gbodyforum.com

 

[pontiacgp]

I removed the g body emergency brake and installed the F body hand brake so I used the F body console that intend to modify. I changed the bellhousing so the transmission sits straight now, the F body console fits better now and I have to figure out what I want to do with it.

 

[Cutlass455]

Reach out to dr78442 He had these on his BBO

Oldsmobile 455 headers

Selling my BBO hooker headers. The type that has one tube on each side that wraps around the frame. They are ceramic coated They have about 5000 miles on them asking $300.00. Plus the ride. Headers only no bolts or gaskets.

gbodyforum.com

Thank you for the lead on headers.
I have a new set of Hooker Super Competition GBody 455 headers I bought 15 years ago.
Yes my project is a long term.
I discovered recently that they will not fit for the 4 speed standard.
I do however know that Thorton industries makes a SS shorty header that works for 455 and standard trans. The Hooker long tube headers are for sale buy the way ;o) l

 

[TURNA]

Thank you for the lead on headers.
I have a new set of Hooker Super Competition GBody 455 headers I bought 15 years ago.
Yes my project is a long term.
I discovered recently that they will not fit for the 4 speed standard.
I do however know that Thorton industries makes a SS shorty header that works for 455 and standard trans. The Hooker long tube headers are for sale buy the way ;o) View attachment 143629 l View attachment 143631 View attachment 143632

Are you using the mechanical linkage?

He has a 5 speed in his car

 

[Cutlass455]

Are you using the mechanical linkage?

He has a 5 speed in his car

Yes, I am currently using the Z-bar system, someday if I come into some extra funds I would buy a Tremec 6 speed with a hydraulic system. My objective for this summer is exhaust, and frame stiffening above the F41 option already installed.

From Hooker fitment for Gbody and 400/455

NEW Super Comp Engine Swap Headers PN 3203-1

400-455 Big Block Oldsmobile

1.875" x 31" Primary Tubes
3.5" x 10" Collector
1982-87 Buick Regal
1978-83 Chevy Malibu
1982-88 Chevy Monte Carlo
1982-87 Chevy El Camino and GMC Caballero
1982-86 Pontiac Bonneville
1982-87 Pontiac Grand Prix
1982-84 Oldsmobile Cutlass Calais
1982-83 Oldsmobile Cutlass Cruiser
1986-87 Oldsmobile Cutlass Salon

Accessory Compatibility:
Power Steering - Yes
Power Brakes - Yes
Air Conditioning - Yes
Smog Pump - No

Transmission Compatibility:
Manual Column Shifter - No
Manual Floor Shifter - No
Automatic Column Shifter - Yes
Automatic Floor Shifter - Yes

 

[TURNA]

99.9% of headers foot notes say they dont work with manual linkage

Dont mean poop!!!

 

[Cutlass455]

99.9% of headers foot notes say they dont work with manual linkage

Dont mean poop!!!

You may be correct on that but my future plan to upgrade rims and tires may interfere with the hooker header tube going around the frame. I plan to replace the dealer installed 1985 15" Western Wheels with the GBodyParts.com newer 18"/19" GNX repo models. I will need those fatter 19x9.5 rears for better traction with the 455 up front.

 

[TURNA]

You may be correct on that but my future plan to upgrade rims and tires may interfere with the hooker header tube going around the frame. I plan to replace the dealer installed (have brochure) 1985 Western Wheels with the GBodyParts.com newer 18"/19" GNX repo models. I will need those fatter 19x9.5 rears for better traction with the 455 up front.
View attachment 143682 View attachment 143683 View attachment 143684 View attachment 143685

Yep you wont be able to make a turn with those wheels