BUILD THREAD 78 Malibu "#DtoxBu/Caged Beast"

Status
Not open for further replies.

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
Lov'n the posts and pics! Like the song says,"the boys are back in town!" It's great to hear from my buds and see your ride again.

Doug

Thanks for the warm welcome back! Really appreciate it. I see a lot has changed on the site! Had to play around and figure things out...

Its AIGHT! Lmao alot of detail work into this car #pressure

LOL! Whatever chump! HAHA! Yeah.. I cant wait to see how it all looks together. I can see it in my head, but cant wait to actually put it together...

Found another pic of the bay cage. it was rattle can'd black right quick so no surface rust would start. The cage bars will be powder coated along with the frame- 2 stage metallic silver to match the car..

16764959418_32fd95dc1e_z.jpg


Pic of some of the suspension parts after powder coat. UMI rear drag bar, front sway bar, QA1 coilovers (may swap out for the Viking setup), SC&C jounce bar. I added a smoke effect to it all...

16923110016_8b5603392d_z.jpg


SBC "357" i put together. Mel blessed me with a freshly rebuilt 350. had a new .40 over bottom end kit and he decided to go a different route. Was perfect for me cuz it gave me the chance to install everything. The entire motor has ARP bolts now. I'll have to dig up the Comp cam/lifter specs.

8669935151_047d08af1c_z.jpg


painted up nicely after a bath and scuff job

8669939611_39257ae185_z.jpg


Bowties for detail!!

8671040070_d538e1db4c_z.jpg


Had the RPM Airgap styled intake coated. WHEW!! Came out creamy! Thanks again prez!!

8559209654_8f70e8037a_z.jpg


I added a little film for detail after I powder coated the top..

16327925823_3dddd8897a_z.jpg


Swapped everything to -6an fitting.. Used a "Koul tool" which made it a snap to do the lines..

8685340367_0890b3e2c1_z.jpg


8876031664_a7cb006f12_z.jpg


16947981405_7baf9df21d_z.jpg


The spark plug wires are braided as well. I was trying to keep the braided theme going. Worked out well

8611744590_b43a7f4740_z.jpg

8611738086_51fff0112e_z.jpg


You can see the theme Im trying to go for here. Looks pretty good..

8651761954_bbabe8f840_z.jpg


This was mocked up before I had the valve covers powder coated..I like to mock it all up on the workbench first. Sometimes ill even paint it right quick to see if I like the color combos..

8653869600_e8739c0c09_z.jpg


8653870698_515e04d44a_z.jpg


Mock up

8719868970_9be6f8f225_z.jpg


FIN... I swapped in the Dougs headers from my elco project cuz they were wrapped. I dyed em black. This motor will not be fired up most likely. Im going with a carb'd 6.0 "LS" setup for it later. It will give me an idea of how the blacked out theme will look tho....

16741709467_f8e093eb7b_z.jpg



Still working on updating all the old pics from page 1. Slow process but knocking it out a little at a time...

Thanks for checking back fellas!!

lSwARREN
80Zup!!
 
Last edited:

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
My fave UPS guy shot thru and kicked it with me for a second. He asked "Whatchu doin to the cars now bro??!" I opened the box to show him the goods for the Bu..

wil-261-13269-bk_ml.jpg



Summit link--->http://www.summitracing.com/parts/wil-261-13269-bk

Firewall mount link JT Racecraft--->http://jtracecraft.com/G-body_170100.html

16362988813_f1d691c597_z.jpg

16982173431_559f57546d_z.jpg

16982176371_7327a67034_z.jpg

With the JT mount...

16775700477_1c0c3a2bef_z.jpg

16981739482_f5bb658631_z.jpg


They changed the font to a bold style on this cap. I like the old style i have on my 87 SS

16796892979_54aabbb9c1_z.jpg


Checked my lil gbody stash piggy bank and I had enough saved to snatch a UMI rear shock tower brace. This will compliment the rear drag bar I have from them. Once it gets here, I'll shoot it to my powder coat guy for the smoke treatment I have on my other UMI suspension goodies.

Photo from th UMI website..

16806409019_185aedf6b6_z.jpg


Will look bad *ss with the frame and new gas tank coated, cleaned up rear end and underbelly clean up. The detail will really stand out once put together..

16744419789_3df8773fab_z.jpg


16325579854_d0cc11a05d_z.jpg


UMI drag bar before I re-coated it. But you see how it all will tie together..

8502047199_6709bf078a_z.jpg


I had the sbc's "357" mounts done in red and "smoked" The solid mounts are from UMI. I got the idea from UMI's "Green Machine" build. I couldnt find the mounts they used on their block tho. But these will do. The added smoke effect gives it a cool lil touch I think..

16740604787_e38114f35f_z.jpg

16740607607_f14f43c0f7_z.jpg


I'll keep editing the old post a few days at a time to show some of the old work done last year. Hopefully I can make it out to Az next month to get some new updates for you guys. Thanks for checking back fellas!!

LsWarren
80zUP!!
 

elcoslick33

Apprentice
Mar 25, 2015
84
27
8
SoCaL-AZ
Damn this baby is gonna look freaking hot bro I just want to get mine to look like brown sugar
 
  • Like
Reactions: 1 user

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
Damn this baby is gonna look freaking hot bro I just want to get mine to look like brown sugar

Thanks fam! Thats the goal for my elco. A clean paint job, decent interior, irocs, frehsed up suspension, re chrome all the trim and new glass. Hit Mel up when you are ready for paint. Dana (brown sug and my Bu's painter) will get you right!

Been slowly updating all the old post. Im up to page 4 I think. I picked up some Spohn front swaybar endlinks. They look pretty clean..

16827037139_7e12c1c73a_c.jpg


16390853504_05a435bfc6_c.jpg


Mocked em up on my SS right quick...

16825759760_47fe9929f7_c.jpg


Scuse' the dust...

17011837762_44f78c4f59_c.jpg


17011838242_726ef4b2be_c.jpg


And you know 80's rolls with the fresh hardware on all the suspension and body mounts.......:mrgreen:

Click pic below for a 15 sec vid of the endlinks




Should complement the other suspension upgrades nicely. The red, black and silver theme continues. I cant wait to get out there next month and start on the frame. Im bringing the engine bay cage bars and new sump'd gas tank back with me to get the smoke effect added for a lil extra detail. Well.. Back to updating the old post. Thanks for checking back.:cool:

LsWarren
80zUP!!:twisted:
 
  • Like
Reactions: 1 user

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
The UMI rear shock tower bar just came in. I should have just ordered the control arm reinforcement/frame braces but I'll get those later. Part looks sweet and will flow well with the other UMI suspension parts. Once I get the braces, I'll shoot everything to my powdercoater and he will re coat em to match the other parts and add the smoke effect..

16835926138_8cab6cc0e1_c.jpg


Click pic below for a short vid of the part..



Looks like I'll be headed to Az back to back weekends-last weekend of April and first weekend of May. Perfect! We should have no probs yanking the frame. We will probably pull all the suspension parts the first weekend and then pull the frame out the following. Cant wait!:banana:

Thanks for checking back fellas!!:cool:

LsWarren
80UP!!
 
  • Like
Reactions: 1 users

melman109

Royal Smart Person
Apr 22, 2008
1,168
94
48
Arizona
Nice to see you back on her again! I need that shock tower bar in my life :mrgreen:
 
  • Like
Reactions: 1 user

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
image.jpg
Nice to see you back on her again! I need that shock tower bar in my life :mrgreen:

Thanks bro!!! Yeah man!! I was looking thru the UMI "Green Machine" build and was like awww damn! Gotta have it! We were talking about getting a bar welded to add a little support back there since the Bu's frame was notched. This is perfect!! Can't wait to get out there this month to pull the frame bro! Gonna look so clean and crisp with all the UMI parts, cleaned up undercarriage, new tank/straps and other goodies..Slowly but surely the old girl is coming to life...

LsWarren
80zUP!!
 

79MaliCrazz

G-Body Guru
Nov 6, 2010
577
70
28
Lake Wylie,SC
Looking good bro.
 
  • Like
Reactions: 1 user

Bumpin1ohmSS

Royal Smart Person
Jun 17, 2008
1,643
113
63
Cali to Az
Looking good bro.

Thanks bro!! Wish the car was here cuz Id be on it every day lol. Its been 6 months since I last saw it. I'll be out there at the end of the month tho. Cat wait!!

Some pld pics of the tail light housing and lens cleanup. Did some "arts n crafts" on em. Come out clean! I also picked up a new lens set. On the fence if Im gonna use em or not. I was waiting for my led guy to get at me about sending him the tails, but it never worked out. I have another plan tho. Just waiting to get the cash together for the parts needed..

I tore em apart, cleaned em up and prepped em for paint. I used some adhesion promoter and some VHT shassis paint in satin finish. Looks pretty clean

16760263938_c55743c3c9_b.jpg


Click photo below for quick vid



And I snatched a new set of front turn signal lenses. I opened them up and painted the insides black. The Prez suggested that. Looks sweet!! Thanks bro!

16327911833_e2485b3963_b.jpg


Picked up some Kirky's for the project. Mel shot me a pic of em mounted in a G body using stock gbody seat tracks. Had to have em! I still need the custom work done to kae em fit using the stock tracks tho. I want to be able to go back to stock seats if i wanted to..

16873659110_b78eca4338_b.jpg


Got the covers for em also..

16873410628_54d5f07d83_b.jpg


And then Mel dropped em in his el. I loved the look so much, I told Mel if he wanted to keep the set, he could have em. Mel has put a ton of leg work in for me on this project since I'm in Cali. Had to show him some love for all the work. I'll grab another set later...

17061263405_8a8612c972_b.jpg


16873713550_51099dac11_b.jpg


More goodies for the project from Spohn. We also picked up new body bushings and hardware. Cant set a freshly coated frame (when we get er done this month) back down on old 30+ year old bushings!

16874979839_97c456bf75_b.jpg


Been a long road with the build. Makes it hard for me to make any progress with the car being in Az. But the 80z crew will get er done! Thanks for checking back!

LsWarren
80zUP!!
 
Last edited:
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor