87 Monte SS
- Thread starter Bumpin1ohmSS
- Start date
- Status
87 SS:Both seats are in
HAHA!! man I swear it did! I was damn near out to the street sprayin that door panel. LOL! Me and Roro gotta make it out your way soon bruh. That would be a cool trip..
Thanks fam.. It could really be clean if I would have takin my time on it. But since this is just to give me a better idea of how the black will flow, it works cool for now. Its hard to visualize what I wanted the interior to look like. Now I can see where I want some chrome, or silver pinstriping. Shiz like that ya dig....
Got the other seat in. I waited till my lady was good and snorin' and straight snuck out! HAHA! Hit the shop and finished the other seat install and polished up a few parts i the bay. I also installed my hood hinges. Elco Mel had em chromed for me a while back. Clean job.
Working on the power mirror wiring today. I also want to hookup my rear passenger interior lights and "TTOP TONY MOD" ttop panel light. That shop butchered the wiring and they hooked the gauge panel up to the dimmer. I cant run the interior lights off the factory switch because of the gauge panel being wired to it. I want to run the lights off another hidden switch AND I want them to come on when the dorrs open/off when closed. I'll look around and see what I can come up with. Seems pretty easy to do. I need new door pins also...Any help or suggestions would be greatly appreciated
Elco Warren 8)
80zBabiezCC
youngdeezy said:i think i want to come back down 1 time before the big gbody run in the summer. lmao this boy just said wasp killer...fool you be clownin
HAHA!! man I swear it did! I was damn near out to the street sprayin that door panel. LOL! Me and Roro gotta make it out your way soon bruh. That would be a cool trip..
kuruption109 said:loked clean in the txt page u sent but looks even better on the comp.....comin out good bro
Thanks fam.. It could really be clean if I would have takin my time on it. But since this is just to give me a better idea of how the black will flow, it works cool for now. Its hard to visualize what I wanted the interior to look like. Now I can see where I want some chrome, or silver pinstriping. Shiz like that ya dig....
Got the other seat in. I waited till my lady was good and snorin' and straight snuck out! HAHA! Hit the shop and finished the other seat install and polished up a few parts i the bay. I also installed my hood hinges. Elco Mel had em chromed for me a while back. Clean job.
Working on the power mirror wiring today. I also want to hookup my rear passenger interior lights and "TTOP TONY MOD" ttop panel light. That shop butchered the wiring and they hooked the gauge panel up to the dimmer. I cant run the interior lights off the factory switch because of the gauge panel being wired to it. I want to run the lights off another hidden switch AND I want them to come on when the dorrs open/off when closed. I'll look around and see what I can come up with. Seems pretty easy to do. I need new door pins also...Any help or suggestions would be greatly appreciated
Elco Warren 8)
80zBabiezCC
I just started stripping all the panels and headliner in the regal yesterday, can you tell me where I can find some upper 442 door panels from I need a pair?
hey man that interior looks sweet! i like the hood hinges too, did you hae them plated or bought them? and what are you doing for door sills? tnt race shop had some fabricaated aluminum ones that would look real nice in your ride, check em out: http://www.tntraceshop.com/1978-1988_G-body_200156.html
so the krylon fusion could also be used for vynil? i might check that one out oo and one question to take off ur back seat not the part u sit on but what u lean back on is it only the 2 bolts at the bottom and it comes right off ?Bumpin1ohmSS said:
warren yall all going ham right now on the painting so im joining in. tomorrow im sliddin by the paint spot to get my black. thanks for gettin me back on this, when i fixed my console over a year ago i said i was going to do all this stuff but never did. your bringin my interior back!
Fam Those lower GP panels are the biz!!! Imma copy and do my speaker lower panels trimmed in polished aluminum. Thanks for that video. Imma head to HF and get that welder too!! Man we all doin tha damn thang. You young brothas keep me motivated and pumped to learn and get like all yall. Thanks for keepin me updated on your project bruh....
Got the dash out the attic and started working on it. I got the momentum bug now and cant stop wont stop till the Iroc King reaches the tippy top! Did some epoxy work on the radio area. I did a radio flip mod and wanted the "cage" that the hvac unit and head unit sits in to be secured nice and tight. Taped it off and "molded "the epoxy in. I let it dry over night and started some pilot holes for the screws. Nice and tight!! Oh...Im not doing a dash cap for this. I can get the whole dash wrapped for $200. Caps run around $100 or so. Id rather go the wrapping route. This project will cost me about $50 to do if that much and I'll be more than happy with the end results. I can wrap the SS og dash later. If I find a cap for like $60, then I'd snatch it up and do it...
Had to trim the cig lighter piece out. This "flip" relocates the lighter also. You can see that this area really doest have much meat for the cage to hold onto. I'll take care of that...
mocking it up to see where I need to add epoxy
Taping the area off for the "mold" job
Poured and set. Hard as a rock in about 5 minutes. Its a 2 part epoxy from PepBoys..
Sits nice and flush..
Filling in the cracks on top. I'll sand these lil areas down. Onnly a few cracks on top. After I spray it, a carpet kit is goin over it. Im not really worried about it being perfect. The front of the dash and radio areas are in perfect shape.
Coming together nicely
Thanks for checkin back..
Elco Warren 8)
80zBabiezCC
Got the dash out the attic and started working on it. I got the momentum bug now and cant stop wont stop till the Iroc King reaches the tippy top! Did some epoxy work on the radio area. I did a radio flip mod and wanted the "cage" that the hvac unit and head unit sits in to be secured nice and tight. Taped it off and "molded "the epoxy in. I let it dry over night and started some pilot holes for the screws. Nice and tight!! Oh...Im not doing a dash cap for this. I can get the whole dash wrapped for $200. Caps run around $100 or so. Id rather go the wrapping route. This project will cost me about $50 to do if that much and I'll be more than happy with the end results. I can wrap the SS og dash later. If I find a cap for like $60, then I'd snatch it up and do it...
Had to trim the cig lighter piece out. This "flip" relocates the lighter also. You can see that this area really doest have much meat for the cage to hold onto. I'll take care of that...
mocking it up to see where I need to add epoxy
Taping the area off for the "mold" job
Poured and set. Hard as a rock in about 5 minutes. Its a 2 part epoxy from PepBoys..
Sits nice and flush..
Filling in the cracks on top. I'll sand these lil areas down. Onnly a few cracks on top. After I spray it, a carpet kit is goin over it. Im not really worried about it being perfect. The front of the dash and radio areas are in perfect shape.
Coming together nicely
Thanks for checkin back..
Elco Warren 8)
80zBabiezCC
i like that cig lighter located on the bottom make it look a whole lot better espeially when u plug something into it....
- Status
Similar threads
