Blueprint heads.

[39F]

May I suggest the brodix ik200s or ik180s as they come with 64 or 70cc chambers very nice head for 999.99 complete ,mine are on my flat top 400 comes right out to 10.9-1 with the 70cc ones ,I run on pump gas 100% of the time and was driven daily won alot of races this summer too

 

[64nailhead]

This is the cam that was in it when I originally got it in a 350 and I was happy with the street manners. Problem was it had 305HO heads, so I'm familiar with the whole race gas thing. Should have mentioned 3500 stall and 3.73 gears.

Race gas thing? What does that mean?

 

[melloelky]

EVERY time I hear 292 cam.

that's a full cam,all 16 lobes..

 

[fleming442]

that's a full cam,all 16 lobes..

I thought those were "3/4 race"

 

[melloelky]

which ever heads you do decide to go with make sure they're drilled for the steam holes.

 

[Jim Rockford]

I had a set on a TPI 355 I built, they worked great .

 

[Jim Rockford]

I thought those were "3/4 race"

Buddy had one and you had to hold on when the posi kicked in..LMFAO

 

[Dustpan84]

I ended up ditching the comp cam and going with a lunati voodoo series cam. 10120705LK. Any experience with that one? Blueprint heads turned out to be nice pieces as well.

 

[melloelky]

I ended up ditching the comp cam and going with a lunati voodoo series cam. 10120705LK. Any experience with that one? Blueprint heads turned out to be nice pieces as well.

a friend of mine swapped out his sbc for a blueprint version,he had to elongate the headers to get them to bolt up to the heads.he showed me the headers on the old heads on the stand and against the new version.just an fyi.

 

[64nailhead]

It'll like rpm's and it won't like being loaded much below 2500. If that's how you intend to drive it, then it'll be great. I don't consider it much of a family cruiser cam, but many families like tire smoke. I'm the only one in my family that does (hehe).

I don't think it's much different than the one you linked previously.

If your compression is over 10:1, then thing is going to love to spin over 6K. What did you decide with headers and intake?