MONTE CARLO "COPO" Monte Carlo SS - Turbosaurus Build (Swinging Dick Racing's c*ck got bent... she bounced a little too high & hard, & came down awkwardly)
- Thread starter motorheadmike
- Start date
BLACK FRIDAY SPECIAL. Thru 12/2 Everything (Including Calendars!!) in the shop is 20% off. use code BLACKFRIDAY24.
- Status
Seriously.
This whole concept had been floating around in my head for years. Bringing it to fruition has been one hell of a hurdle. Fortunately I am not gun-shy, so cutting things out isn't a problem. But, there was definitely anticipation of something tragic occuring when I cut out the stock rails. Nope, maybe 1/16" of shift at the back (on both sides) when the tension was released - which isn't bad considering the extent of the carnage.
I'll be happy to put the sheet metal back in over the coming weeks.
It's been a wild ride thus far.
Last edited:
Sooooo... funny thing about doing unusual things. Sometimes you hit a bump in the road on your travels and need to adjust accordingly.
Long story short. When I cut away the frame rails I discovered two 1/2-1" protrusions into the wheel well area (see green). These were the reliefs for the LCAs. This is roughly where the sidewalls will be. So despite making everything 2 inches narrower, I only gained half of that right here.
I now have to make another box section and move this all inboard another inch (see green), and cut out the existing work (see red).
This is not a huge deal as I still have the templates. I just have to clean off all the paint I laid down before welding it in. FFS.
As an added bonus this will likely encroach on the real estate of the stock LCAs. An expense for sure replacing them with the adjustable LCAs I want from UMI. But, it would seem that UMI may have these backordered until June.
Why?
Because: F*ck you. That's why.
Signed, COVID
The universe is a funny thing.
Long story short. When I cut away the frame rails I discovered two 1/2-1" protrusions into the wheel well area (see green). These were the reliefs for the LCAs. This is roughly where the sidewalls will be. So despite making everything 2 inches narrower, I only gained half of that right here.
I now have to make another box section and move this all inboard another inch (see green), and cut out the existing work (see red).
This is not a huge deal as I still have the templates. I just have to clean off all the paint I laid down before welding it in. FFS.
As an added bonus this will likely encroach on the real estate of the stock LCAs. An expense for sure replacing them with the adjustable LCAs I want from UMI. But, it would seem that UMI may have these backordered until June.
Why?
Because: F*ck you. That's why.
Signed, COVID
The universe is a funny thing.
And you thought you'd get a jump on spring, didn't you? But NOOOOOOOOOOoooooooooooooooooo. Covid says NO SOUP FOR YOU!
If ultra custom fabricobbling was easy, all the kids would do it.
If ultra custom fabricobbling was easy, all the kids would do it.
Turns out welding overhead is hard, and they have fancy tests for it... for the professionals. Definitely need to up my game regardless. Ain't quitin', just havin' a shitzall.
Bonus Letterkenny for the Bald Eagle Brigade:
I HATE welding overhead. I suck at it hard.
- Status
BLACK FRIDAY SPECIAL. Thru 12/2 Everything (Including Calendars!!) in the shop is 20% off. use code BLACKFRIDAY24.
Similar threads
