Just trying to figure out what a/c lines will work on my 84 cutlass with sbc 350 and gmpp serpentine belt assembly? It doesn't look like the olds lines for 231 or 307 will work...
GMPP Serpentine Assembly A/C lines?
- Thread starter 84cutspreme
- Start date
- Status
on my 86 GP with the stock set up with the 305 the compressor was on the driver's side and the lines went to the passenger side. I didn't realize the 80 was different
When I changed my '84 Monte over to serpentine, I used the setup from an '88 F body, then used an F body condenser and A/C lines. I had to bend a couple of the lines slightly, but they worked fine.
Does anyone have a few pics of their setup with 92 or 88 camaro lines? Right now I have my original buick condenser where lines come out on pass. side, I also still have the monte condenser where the lines come out on driver side from sbc pre-serpentine setup. I have both the accumulators too. I was told originally by some guy somewhere that the 92 a/c lines would work perfect and I could use my original buick/olds style accumulator and condenser with pass side lines. So I just had to buy the hose assembly for 92' camaro. The pics aren't the greatest online of what the new lines look like. I checked the 88 and 92 hose assemblies and they do look pretty similar, kind of looks like the hose that goes from compressor to the accumulator was a little longer on the 88', I couldn't tell. Anyone they could help please
- Status
Similar threads
