HAFRODs 78 Aeroback Salon build

[HAFROD]

I bought a package of vacuum ends in straights and 90s. They finish it off like original

 

[HAFROD]

This is my vacuum advance hard line I made. I used a long piece of hose at the advance unit to be able to move when I time the engine. I used a 90 degree vacuum nipple on the port

 

[1bad79]

is it going to run yet tonight if so I'm staying up for awhile

 

[HAFROD]

This took me a bit of time to build these battery cables. I just have them temporarily clamped under the isolators because I made them long. I don't have the inner fenders on yet so I may need to shorten them. Regardless, I'll have to solder. I drilled and tapped the chassis for black ARP bolts in the cable clamps. I used polished ARPs for the battery clamp bolts. Looks kinda stock huh?

 

[HAFROD]

is it going to run yet tonight if so I'm staying up for awhile

Its already running. I actually drove it back into the garage before dinner. 🙂

 

[1bad79]

Its already running. I actually drove it back into the garage before dinner. 🙂

NICE

 

[liquidh8]

Great progress, and the attention to detail shows.

Sent from my Z981 using Tapatalk

 

[DRIVEN]

Beautiful work. Still one of my favorite cars on the site.

 

[ssn696]

Please share the source of your vacuum line and fittings. Mine break off when I look at them.

 

[HAFROD]

Please share the source of your vacuum line and fittings. Mine break off when I look at them.

They are available at most parts stores. Dorman if I remember right. They come in an assortment and cheap too