Installing alt on passenger side

[Bri guy]

There are 2 places close to town that build motors. I doubt they have these sitting on the shelf. And without knowing the specs of what would work, not sure what to ask when i call around

 

[TURNA]

Ya its a 6" waterpump.. Pulley diameter is about 5 5/8. This is the inner grooves that are up against the block

I will measure mine tomorrow to see if it is smaller

 

[Bri guy]

I ordered those 2 pulleys. Weather is getting nicer. Just wanna drive the car. They took the time to check measurements to let me know what i exactly need instead of me buying random parts hoping they work. Probly get them by wednesday

 

[TURNA]

I hope they work for you.

 

[Bri guy]

Ya me too. After checking measurements They said it will.....i need some good luck now

 

[Bri guy]

Nothing worked. Pulleys they sent me arent lineing up with anything. Cant even tighten up the crank pulley cuz the ID is so tight a sockect cant even fit on the head of the bolt with hitting the side. Wtf is going on with this piece of sh*t. Why cant anything go right? Thought the "403" is considered small block. Clearly theres something different about the 403 compared to other small block/big block motors

 

[TURNA]

Nothing worked. Pulleys they sent me arent lineing up with anything. Cant even tighten up the crank pulley cuz the ID is so tight a sockect cant even fit on the head of the bolt with hitting the side. Wtf is going on with this piece of sh*t. Why cant anything go right? Thought the "403" is considered small block. Clearly theres something different about the 403 compared to other small block/big block motors

They need allen head bolts

 

[Bri guy]

Good thinking. I will get some.

 

[fleming442]

If CVF made the damn bracket, they should be able to tell you which pulley you need. 2 different sets and neither fit?
I used some junk ePay thing for like $35.

 

[Bri guy]

The bracket was suppose to work with my car. But the pulley on the bracket didnt line up. Theu sent me spacers and longer bolts to make it work. I lined everything up...but when tightening the alt belt to where it needed to be caused the bracket to rub against my wp pump. So i emailed them. They said to measure my wp. Sent them photos of the measurement and how i did it. They sent me these 2 pulleys that i posted on the last page. Got them today. Put them on kinda on, i wanted to see how things lined up before reassembling. And doesnt look like the ps pulley will line up now. I will get the bolts now and Tighten them down. But i dont think this is going to work.....