I ordered these for my 80 monte moog 5606. Went to install them and noticed a big difference in size has anyone compared or are the ones I pulled out not stock🤷🏽♂️🤦🏽♂️. They went in easy as hell which has me a lil worried
Moog 5660
- Thread starter adrianMCmoreno
- Start date
- Status
The 5660s are a much higher spring rate than the 5606, so the wire will be thicker. The free height can be shorter because the spring won't collapse as easily when the weight is placed on it. Did you happen to get a measurement at the fender lip before you yanked it apart?
The 5660 should put the car at stock ride height. To lower the car each 1/4 coil cut drops the car 1" and adds to the spring rate cause you are making the spring shorter in length
Load height for a 5660 is 10.75 inches with a small block
They will act as a drop spring an inch or two depending on your engine and options
5660's with a big block and ac
They will act as a drop spring an inch or two depending on your engine and options
5660's with a big block and ac
Load height for a 5660 is 10.75 inches with a small block
They will act as a drop spring an inch or two depending on your engine and options
5660's with a big block and ac
the 5660 doesn't drop the car an inch......where did you read that?
- Status
