mounting body to frame
- Thread starter MrRabbit24
- Start date
- Status
Position 1 uses GM P/N 10049638 (sold ea., 2 needed). Bolt is 12 X 1.75 X 95mm long.
95mm is not common so you have to use 100mm.
Position 3 uses GM P/N 14085301 (sold by pkgs. of 5, 2 needed). Bolt is 10 X 1.5 X 55mm long. Also need two nuts.
Position 2, 4, 6, 7 uses GM P/N 3524497 (sold by pkgs. of 5, 8 needed). Bolts are 10 X 1.5 X 80mm long.
95mm is not common so you have to use 100mm.
Position 3 uses GM P/N 14085301 (sold by pkgs. of 5, 2 needed). Bolt is 10 X 1.5 X 55mm long. Also need two nuts.
Position 2, 4, 6, 7 uses GM P/N 3524497 (sold by pkgs. of 5, 8 needed). Bolts are 10 X 1.5 X 80mm long.
Do you have a picture or diagram you are going off of and where can I get them I tried eBay but the ahole never sent them and never arrived it's been 2 weeks
Thanks now do I need to buy nuts for them ? I have polythane bushings so I don't need the corroded metal things right ? Any pics would help thanks.
Bushing kits should come with new sleeves and washers, you will need the nuts if you are buying loose bolts. If you buy a set, ie Gbodyparts, they should come with them. Prob cheaper and easier to buy the hardware local rather than order it.MrRabbit24 said:
Yea well I order the boltsfrom Gbody.com box arrived today with no bolts in it just the box and receipt I I paid extra for 2 day shipping and I get a empty Fkn box!!
- Status
Similar threads
