BUILD THREAD Project long time coming

[Streetbu]

I found them new/remanufactured from PowerStop for less than $800 for the pair. Starting to wonder if I'm really over doing it and should just go with either the smaller 'Vette 2 piston calipers or the Camaro 4 piston Brembos. Would save me a bunch of $ in the long run.

 

[Texas82GP]

I found them new/remanufactured from PowerStop for less than $800 for the pair. Starting to wonder if I'm really over doing it and should just go with either the smaller 'Vette 2 piston calipers or the Camaro 4 piston Brembos. Would save me a bunch of $ in the long run.

Are you going to autocross the car competitively?

 

[Streetbu]

Are you going to autocross the car competitively?

No, just for fun. There is a local track, about 10 miles from my house. Been on it a couple of times now. It's a riot.Thinking of becoming a member so I can beat on the car more often though. Or at least by track time every year.

https://pineviewrun.com/

 

[Tony1968]

FYI. I paid 300 for Camaro/Brembo calipers and 200 for set of powerstop front rotors

 

[Tony1968]

C7 Z51 rotors I have are 13.6" btw

 

[Streetbu]

I already have the 14" Z06 rotors. I'd really like to use them if possible.

 

[Tony1968]

I already have the 14" Z06 rotors. I'd really like to use them if possible.

C7 ?

 

[Tony1968]

I already have the 14" Z06 rotors. I'd really like to use them if possible.

If they are exactly 14" you may be able to use similar calipers as mine but I thought z06 rotors were like 14.3 inches or maybe larger

Remember these rotors are side specific as well

 

[Streetbu]

If they are exactly 14" you may be able to use similar calipers as mine but I thought z06 rotors were like 14.3 inches or maybe larger

Remember these rotors are side specific as well

C6 and they are actually 13.976" close enough that people call them 14" and these are not side specific.

 

[Tony1968]

Ok. Did not know C6 were that different from C7