What did you buy for your G body today? [2019]
- Thread starter 69hurstolds
- Start date
- Status
scored a new set of summit brand 3.73 gears for $65!!! Brand new in the box !!!
Picked up to 14” donuts for the front of my 88MC
Stopped by the machine shop for the block I had checked and decked it’s a 010 casting but doesn’t have the good caps just going to rering it with the old rotating assembly the major thrust Is still good and the skirts aren’t knocked off the pistons I had them cut.020 off the deck
I
Stopped by the machine shop for the block I had checked and decked it’s a 010 casting but doesn’t have the good caps just going to rering it with the old rotating assembly the major thrust Is still good and the skirts aren’t knocked off the pistons I had them cut.020 off the deck
I
Magnafuel 4303 and 60mm Wastegate from VS. Should be at my door tomorrow when I get home from work.
The 275/50/15 drag radials I have on my 15*8.5 vectors are 10 years old and pretty worn. Mickeys are all sold out and i've had good experience with the hoosiers so I sprung for them.
Last big buy (I hope) I need for the 2+2 for drag weekend.
Last big buy (I hope) I need for the 2+2 for drag weekend.
I pick up a "new" floor jack, the one I have now is done. I have a low profile aluminum floor jack in my trunk for emergencies. This "new" one will be good for the Jeep with the extender on it and on my daughter-in-law's F150. I picked up a Motive pressure bleeder a few days ago and it was the European model so I pick up a hose and connectors to make some adapters for my MC and clutch reservoir and I think my Jeep has the same cap as my MC. My son's BMW can use the adapter that came with it. I'm going to use the 1/2" pex clamps on the 1/2" od clear tube I'm using, I have the pex tools so that will make a clean job instead of hose clamps. The Motive is a good tool to have but here they want over $110 and then you have to buy adapters which Motive ripps you off with the price. I have spare caps so it'll cost me less than one Motive adapter to make as many as I need..... 
All new AC Delco steering parts from Rock Auto.
Center link, idler arm, inner and outer tie rod ends, adjusters, and a new speedometer cable for good measure.
Christmas in August!!
Center link, idler arm, inner and outer tie rod ends, adjusters, and a new speedometer cable for good measure.
Christmas in August!!
Ordered an Aeromotive stealth 340 pump for the in tank conversion, some AN quick disconnect fittings, fuel line, some delphi weatherpack connectors and some new crimpers for them.
- Status
Similar threads
