What did you do to your G-Body today? [2011-2018]

[Martin S.]

finally got the center dash pad installed after 2 years of running with out it. changed the small gauge lights to blue for now. something differentView attachment 85021

Nice lightning; really different !👍

 

[Clutch]

😛
View attachment 85053

No more missing hub caps

 

[wonderboy24]

Where did u get that 1:25 Cutlass?

its a 84 olds hurst model kit. they sell it at hobby lobby. i made it look like my ride.

 

[mclellan83]

Last night got my first color painted and cleared for a damn bug to fly in at the end and ruin it, luckily it was only the bottom right square on the housing so I will have to scuff that and repaint it at some point but may not be until next week

 

[TURNA]

its a 84 olds hurst model kit. they sell it at hobby lobby. i made it look like my ride.

Nice I was wondering if it was that, but I seen it had the half vinyl roof. Nice work!!

 

[Jim hopper]

I just got theas from mikes montes to replace my Worn out scratched and pitted chrome ones can't wait to install these but I have no heat in my garage and it's 32° here unfortunately I have to wait

 

[6door74]

Put these on today but the rear is hitting the frame. They're 18x8.5 with a backspacing of 5.15. The offset is 10 as opposed to the front which is -6. I got the rears on Craigslist but the front is the correct fit because i ordered them new. They have 245/40/18 tires. What size spacer would i need to clear the frame?

Also, the tire place i had mount the tires put the interior side on the outside for 1 of the tires. I didn't realize till i took them out today. Is it absolutely necessary to get that corrected to the right side?

 

[Jim hopper]

If it was me I would use a 1/2" spacer and that's a nice elco

 

[6door74]

If it was me I would use a 1/2" spacer and that's a nice elco

Great, ordering now! Thanks for the help and the compliment. Thanks to my flagship LG cell phone, she can be quite photogenic at times. In person, she's definitely a work in progress. 😆

 

[Turbo Zach]

Put these on today but the rear is hitting the frame. They're 18x8.5 with a backspacing of 5.15. The offset is 10 as opposed to the front which is -6. I you the rears on Craigslist but the front is the correct fit because i ordered them new. They have 245/40/18 tires. What size spacer would i need to clear the frame?

Also, the tire place i had mount the tires put the interior side on the outside for 1 of the tires. I didn't realize till i took them out today. Is it absolutely necessary to get that corrected to the right side?

View attachment 85075 View attachment 85076

You probably only need a half inch spacer, but I dought your studs will be long enough to work. I have 17×8 on the back of my car with 5 inches of back spacing. I run a inch and a half adapters, but my fenders are shaped different than yours.