Ended up destroying the container I had it in but got it dropped off, hopefully it will be done by the time I get back from SEMA
What Did You Do To Your G-Body Today? [2023]
- Thread starter 83MonteCarloSS
- Start date
- Status
Did quite a it today.
Pulled the heads on the 6 liter. It was just the right amount of dirty. Cleaned the pistons. Sorta cleaned the deck.
I also installed the new steering box and Amazon “Jeep” shaft. Unfortunately I didn’t get any pics of that. The good news. It is actually a quick ratio box.
Pulled the heads on the 6 liter. It was just the right amount of dirty. Cleaned the pistons. Sorta cleaned the deck.
I also installed the new steering box and Amazon “Jeep” shaft. Unfortunately I didn’t get any pics of that. The good news. It is actually a quick ratio box.
Got the car back from the trans shop (had the 200-4R built to handle the new motor 🤘) and washed/clayed it. Still needs more detailing work and a coat or 2 of wax, but it’s looking pretty good!
Very nice what upgrades did the shop do for your 200r4? And how much hp is it handling
Ok wasn’t quite finished before that last post. If you add up all the plates on both sides it’s considerably thicker thus throwing off the gear spacing, Gina have to adjust the shim spacers to make up for the difference, learning experience and yeah first time.
New phenolic carb spacer, installed trans cooler, and re-jetted carb after noticing too much fuel spilled eveeywhere... one float was out of whack and the cup on the acc pump plunger was cracked. Running way better
Little car meet down in Niceville today, 78° out. 😎
Last edited:
- Status
Similar threads
