Will GP Inline Tube Fuel lines fit Lemans

[Sweet_Johnny]

Funny, i ordered the trans cooler lines from their site a malibu, assuming they where "all the same," just as everyone on FB told me. They were never listed or mentioned as being for v8 and are different from v6! They need to work on their site descriptions! I asked for a refund due to Improper information, and they denied it. What a company... I am not super happy with them either. Cheapie metal. Kinked very easily. $70 a waste.

I thought that the pre bent fuel line for the carb would be one of only about 5 options- boy was I wrong.

 

[stew86MCSS396]

This probably don't mean squat...I had intentions of putting a L29 intake on the 396 and a TR tank into my monte so I purchased the stainless steel TR feed line...just part of my parts acquisition aka parts hoarding...

 

[CrammerGram69]

I thought that the pre bent fuel line for the carb would be one of only about 5 options- boy was I wrong.

I know all about that to! I ended up making my own from an original.

 

[grandamman]

Finally had time to get these installed. All parts not listed/available for the Lemans were ordered as if I was working on a 79 Grand Prix.
Everything matched perfectly.

I must have forgotten the 5/16 vapor line, so I ordered that today (for Grand Prix)
We'll see if that fits.

So, all lines for the Lemans/Grand Am are available...

 

[grandamman]

Well, the vapor line wasn't what I was hoping for. I did find a local builder that will make it for me. Other than that, all fuel and brake lines are available through inline tube.

 

[CrammerGram69]

Well, the vapor line wasn't what I was hoping for. I did find a local builder that will make it for me. Other than that, all fuel and brake lines are available through inline tube.

How do they fit? I might replace my Brake lines later this year.

 

[doood]

I replaced all but the line that goes from proportioning valve to the rear flex hose with inline tube g-body pre-bent lines on both the 1984 Monte Carlo and 1978 Olds Cutlass Supreme. Same parts. They fit well enough. Was an easy job, aside from difficulty starting threads in the proportioning valve.