What did you do to your non-G body project today? [2020]
- Thread starter Bonnewagon
- Start date
- Status
must be a quick job detailing the interior when there isn't any....
True. But, getting the rubber out of the wheel wells wasn't.
Shame I lost mine in that fishing accident...
That being said, Primary Arms will become your friend real quick. I built mine over the course of a year and found many great deals. Including a COMPLETE stainless barrel upper for $149
Drove mine 1330mi one way and it turned into a pile. It hates the extra air. Well, it did. I roughed in the MAF today and I can do a full pull safely. I screwed up logging the VE so unfortunately I'll have to redo that and fine tune the MAF. Had a ton of knock retard then realized the tune I started with today didn't have my trimmed for MI timing table, so I'll reboot tomorrow with that as well. I bet I'll make 2 logs tomorrow and have what I hit bang on. The truck is definitely more rowdy down here. I hit my minimum anticipated MAP but unfortunately no more. I figured 140-150kpa and I hit a max of 139. I can pulley down another 1/8" and I'm seriously considering it. I only saw a max IAT in the high 190s and that was all the way into a WOT 4th gear pull (I will be linearizing the IAT timing table). In a truck. I began to question my life's choices but definitely got some good loaded data. Hell I typically don't do a full pull through 3rd but it got through it decently down here. Just hope I don't eat a ticket on the way. Fvck3r sh*t$ and gets down here.
- Status
Similar threads
