What did you do to your g-body today 2025 Edition!

[Malibu795]

mclellan83 that Edelbrock is a nice display

 

[scoti]

Installed the quadraje tv throttle arm kit for a 200r4 for a 70's q jet and rigged up a bracket using lockar cables for both throttle and detent. Both clear and looks like it's gonna work. Still need to set the adjustment.

What was your source for the parts?

 

[Zeus785]

More tools, pneumatic jackView attachment 251244

i have one, it takes about 10 secs, to lift my Monte. Don't look at the cob webs LOL.

 

[Slowpoke]

The arm for the carb i ordered from everyday performance. The throttle and tv cables I had stored away for a while probably amazon. The bracket was a cheapo from Aliexpress that i cut.

Everyday Performance Rebuilt Quadrajet Carburetor Store ~ Quadrajet Carburetors for Sale

Everyday Performance reconditions and sells classic Rochester Quadrajet muscle car carburetors.

everyday-performance.com

 

[scoti]

The arm for the carb i ordered from everyday performance. The throttle and tv cables I had stored away for a while probably amazon. The bracket was a cheapo from Aliexpress that i cut.

Everyday Performance Rebuilt Quadrajet Carburetor Store ~ Quadrajet Carburetors for Sale

Everyday Performance reconditions and sells classic Rochester Quadrajet muscle car carburetors.

everyday-performance.com

TY sir. Bookmarked for future reference.

 

[mclellan83]

mclellan83 that Edelbrock is a nice display

Thanks, its actually just a phone that hooks up through bluetooth. Still debating on buying yet another head unit to be able to run my stuff the way I originally wanted and being able to do away with the phone

 

[mclellan83]

Took her to the gym then for a little cruise after

 

[SS_Malibu]

Fixed a coolant leak and a fuel leak just in time for Good-Guys this weekend.

 

[gbodytoys]

Monte Carlo - new engine (well new to me) is being installed

Regal - pulled out the single din for a single din floating unit. Installed a Wolfbox rearview mirror with dual cameras. Hoping to finish the control arms next week.

 

[UC645]

Fixed (more like finished because I forgot to weld it fully) the passenger side muffler, dusted it off and took it out of its tarp prison

Supposed to be really nice tomorrow, so I figured I’d drive it once or twice before I ripped it apart again. Made some changes to the carb over the winter that fixed a stumble at low speeds, but can’t check how rich or lean it is at cruise since the wideband sensor croaked.


Also got my spindles back from Mr. Degeer, put an order for a hub bearing to test fit the C7 brakes to tomorrow. Hopefully they fit, I want this thing done for G-Body Classic.