need some help again guys. so i found the cam kit i think i want to get. i will post it below, along with the carb and intake kit. the intake is just the edelbrock dual plain, and the carb is a 600cfm holley. the cam kit is a complete kit with valves, timing chain, gears, lifters, the whole thing. so i figured since im that far, i better get higher cr pistons, i think i want 9.5:1cr. what pistons would work good? and for the heads, i know the factory heads werent to great, and flowed horrible. would porting them and putting in larger valves be much good? with a 3 angle valve job? or are there any better heads? like 4.1 heads.....? any help is appreciated ! would you let me know how this set up would work with 9.5:cr pistons would work with a good free flowing exh? rough hp number? anything significant? or not too much?
http://www.summitracing.com/parts/EDL-5486/
http://www.summitracing.com/parts/HLY-0-80457S/
http://www.summitracing.com/parts/CCA-K69-246-4/
http://www.summitracing.com/parts/EDL-5486/
http://www.summitracing.com/parts/HLY-0-80457S/
http://www.summitracing.com/parts/CCA-K69-246-4/