Search results

now on that c5 conversion is that used witha stock spindle im assuming? I have the 2" drop spindle and curious if it will work I will probably invest in this kit.

Go to your local oriely and purchase the MOOG 5660 springs cut 1 coil and you should be good. I have 2in drop spindles with the same springs and a coil cut out and I love the look of my 86 SS running 17's with 235/45/17''s all for the front. Good luck any more questions just let me know.

what about the 17" wheel with 4.5 backspace along with the 2" drop spindel

any help on the sizing?

Im lookin to get these wheels. They are the torque thrust-m black with the machined lip. Second row first wheel on the left. http://www.americanracing.com/browse_ar.asp I will go with the 17x8 all around however if I can get an offset deep dish look for the rears I would rather do so. Can...

yea got it out in the sticks of new castle ,KY. But I wanted one so it was it. Not a bad car. Cant wait to put an LS1 in my MC SS this winter though.

Wouuldnt put a dollar into a rice bucket been working and buying my bowties and parts since I was 15 after 5 years workin part time jobs and being a full time student at the University of Louisville I aint got much but I am proud of what I do have. The first is my first car an 86 Monte Carlo...

Wouuldnt put a dollar into a rice bucket been working and buying my bowties and parts since I was 15 after 5 years workin part time jobs and being a full time student at the University of Louisville I aint got much but I am proud of what I do have. The first is my first car an 86 Monte Carlo...

I have some pics of a few gbodys from the 2009 Hot Rod power tour. Not mine because it was not ready for the tour but I caught come others. I will post them as soon as I get a chance.

Currently I have a mild built 350 in my 86 SS. However, I am looking to swap this motor with an LS based motor. Maybe just an LS1 or maybe the new 376 or 454 LSX motors that gm is soon to release. Is there anyone who has information or photos and ideas of a similar previous swap. Information...

Is there a set that will be sequential from top to bottom, side to side or bottom to top?? Also will there be a set for the 86 SS available?

Looks great. I want to do the same however I am going to do complete black interior with the red stitching in the headrests and floor mats.

street/strip cruiser u need no a/c nor heat I live in Louisville KY and am working on the same thing as you only right now it is a daily driver. Tomorrow I will be pulling off the rest of of the lines and heater box to put a delete panel in my only thing is I think I am going to ream holes then...

Has anyone mini tubed a 84-88 SS, an 86 in particular? I would like to go with a 19in rear and 18in front wheel setup just want to see if anybody has already tried it and can give me tips and pics. Thanks guys.

Don't frown on your idea after reading this but if you are wanting to turbo a sbc you have alot more to worry about then attempting to turbo a honda. First sbc are not built for high boost. They have high compression and to get one adequate for some good boost you need low compression. But you...

Don't know about lenses but you can always take the route I did. Check this out. http://gbodyforum.com/viewtopic.php?t=8652

I have not got in trouble yet. From what I know as long as they illuminate they are legal.

Got bored and wanted to do something different. :D Here are the original shot of the taillights. Here are the blacked out Lights in the day time. Here are the tail lights illuminated.

is this one dropped at all

Do you have any pictures by any chance. Thanks