I tried to stop last year coming from Ohio after picking up my 4.1 Block, but parking was non existent. This year we splurged, VIP campsites with the teams, and box seating.
I'd imagine it could. I know they aren't cheap!
BUILD THREAD 36x48x14 Shop Build Update 10/10/2024, Additional Lighting
- Thread starter liquidh8
- Start date
I tried to stop last year coming from Ohio after picking up my 4.1 Block, but parking was non existent. This year we splurged, VIP campsites with the teams, and box seating.
Took some pictures light while I was trimming off some extra spray foam. I need to sweep/clean/mop the floor to get the cut dust off, but other than that I am just going to press on with installing the foam board.
I do plan on sealing the floor, but that will wait until the full 28-30 days have passed.
I do plan on sealing the floor, but that will wait until the full 28-30 days have passed.
Thank you and hell yeah I am! This has been a long time coming, and I look forward to getting it 100% finished.
No real progress as of late, ordering some concrete sealer, ordered attic vent things for the eves of the roof, then I'll foam the ceiling between the trusses. After the sealer is cured, then the lift!
I managed to get out there last Thursday night and Friday morning to sweep, blow, and mop the floor. After that while the floor was dying, I finished installing the attic vents. Once the vents were done and the floor dry, I put down the concrete densifier, I went with Foundation Armor S2000. I spoke with their tech line, and I need to give that 5-7 days before putting down the sealer, SX5000 WB. I'm hoping to get on that Thursday night.
Going to get out there tonight, blow the dust off the floor, and apply the SX5000 WB sealer. I'll snap a few pics now that I have my phone back.
Here are few pics from last night. These are after the cured S2000, but before the SX5000 WB.
And here is while I'm applying and after 2 coats.
The pump sprayer I am using to lay it down.
Got a mop to move around any material that got real heavy, and ensure even coverage.
Just the back half fist coat.
All layed down, 2 coats.
The pump sprayer I am using to lay it down.
Got a mop to move around any material that got real heavy, and ensure even coverage.
Just the back half fist coat.
All layed down, 2 coats.
I'll get out there tonight and see how it absorbed. I should be getting my breaker panel in the mail (from Lowes) today. I have the URD on order. I hope in the coming weeks to get the ditch dug, get the power run and fiber run to the shop.
Similar threads
