403 Head Question

[TURNA]

Drive over to Machine World and ask. Or go see Bob at Ace Crankshaft. I still think BBO heads are the way.....

I asked him for a set of heads, He couldnt be bothered when I said Oldsmobile.

He should get off the dope!!!

And ACE Crankshaft no longer exists its all Machine World now since Bob sold off the business and is now a worker there

 

[500/600]

uuuum no

CDLV 👍

Google

 

[art]

Andy Miller is 2 hours away. He did my iron heads. He is not inexpensive, just good.
845-369-9602

 

[fleming442]

I'd let Andy give me a head job.

 

[TURNA]

I do my own head work

I got the hardened seats, so far so good

Have to use a shallow seat like in the old fuelie heads

 

[1bad79]

I'd let Andy give me a head job.

I wouldn’t let Andy give Richard Simmons a head job

 

[olds307 and 403]

Good for you, installing seats isn't something I would attempt. Show some pics of the finished heads, the exhaust side is just horrible. Jim at J+S got good numbers on 4A heads after many hours of porting.

 

[art]

I figured I would get some flak about Andy. Paul Tester (Tester Motorsports) is in Fairlawn NJ. He doesn't like Andy either. But he does work on Oldsmobile stuff.

 

[TURNA]

Ok hardened seats installed!!!!!!

Also machined the guides for the viton seals

 

[500/600]

Looks real good