83 GP build

Status
Not open for further replies.

kalidromos13

Master Mechanic
Oct 12, 2016
363
435
63
Palmdale, CA
Looking good there!! How does it ride with the coil-overs?
 

Happy camper

Master Mechanic
Nov 21, 2016
263
375
63
San Dimas Ca.
Back at the suspension again, after lowering with the coilovers there wasn't enough travel , so this past weekend i raised the coilovers 1 inch and installed some 2 inch drop coils, and while there changed the wheel bearing, rotors, and brake lines, and a little painting on the calipers. 20170528_115512.jpg 20170528_115503.jpg
 
  • Like
Reactions: 5 users

Clutch

Geezer
Apr 7, 2017
5,189
10,913
113
Brick NJ
Now on with the suspension.
I put on some 2" lowering springs in the the rear for a A body from cpp and some kyb shocks . Was a little nervous about the springs .
View attachment 59970 the unsprung height difference is about 2 inches .
But on the car they did what i wanted View attachment 59977 View attachment 59979
Now i did order the viking coil overs, new upper control arms , tall upper ball joints and a compete front end rebuild kit to tackle the sloppy steering . Now just to find the time to get that installed.
Nice car I like the wheels what are they?
 

Happy camper

Master Mechanic
Nov 21, 2016
263
375
63
San Dimas Ca.
I also p
Nice car I like the wheels what are they?
They where some 18x8.5 foose wheels with 245 45 18 tires , jusr pulled them off and sold them , have some new 19x8.5 and 19x9.5 wheels going on this weekend with 275 40 19 and 245 45 19, there being Powder coated this week, ill post some pics when i get them back.
 
  • Like
Reactions: 1 user

Clutch

Geezer
Apr 7, 2017
5,189
10,913
113
Brick NJ
Now on with the suspension.
I put on some 2" lowering springs in the the rear for a A body from cpp and some kyb shocks . Was a little nervous about the springs .
View attachment 59970 the unsprung height difference is about 2 inches .
But on the car they did what i wanted View attachment 59977 View attachment 59979
Now i did order the viking coil overs, new upper control arms , tall upper ball joints and a compete front end rebuild kit to tackle the sloppy steering . Now just to find the time to get that installed.
Nice car I like the wheels what are they?
I also p

They where some 18x8.5 foose wheels with 245 45 18 tires , jusr pulled them off and sold them , have some new 19x8.5 and 19x9.5 wheels going on this weekend with 275 40 19 and 245 45 19, there being Powder coated this week, ill post some pics when i get them back.
Your old wheels would have looked good on my 87 Cutlass
 

Opie Knievel

Rum Fueled Midnight Mechanic and Moderator
Sep 6, 2010
1,512
1,859
113
Brodhead, Kentucky
Will if i ever get the suspension where I want it, Ill start on the interior, changing all the grey to black , than body and paint ,and last but not least maybe a ls swap


You're doing it backwards. Everybody knows you need insane power before brakes, suspension, etc., etc.....

Seriously, that's a good strategy. What are your plans for a transmission?
 
  • Haha
Reactions: 1 user
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor