'83 Regal V6 to Truck Chevy 350

[TURNA]

Here is your mount.

[URL=http://s43.photobucket.com/user/turna454/media/1_zpsyzwxh7pp.jpg.html][/URL]

You can see here that your mount is a little bit taller




I get just about 3 inches, 2inches and 2.5 inches measuring the mount

 

[AlabamaHit]

Here is your mount.



You can see here that your mount is a little bit taller




I get just about 3 inches, 2inches and 2.5 inches measuring the mount

Thank you for that.
I know I can get the brackets from Any G-Body V8 is what I read. But does that literally mean any? So any 305 or 350? Like off malibu or monti?
I am very impressed you have all that stuff like that.

 

[pagrunt]

Thank you for that.
I know I can get the brackets from Any G-Body V8 is what I read. But does that literally mean any? So any 305 or 350? Like off malibu or monti?
I am very impressed you have all that stuff like that.

Any '73 up A/G body SBC will work. Can't remember off hand if '73-'75 BBC is the same (thinking they are.) '77 up B bodys use the same.

 

[AlabamaHit]

I've changed my mind on the frame side mounts. I have decided to go with solid because well...as we all know it is a major pain to change them. I wanted to make sure these where right kind for that. For engine side I will have to go to a junk yard next week.

http://www.ebay.com/itm/Small-Block...ash=item2c5aa6f1c0:g:uTMAAOSw6EhUPGhJ&vxp=mtr

 

[L67ss]

Remember. You'll need an additional frame mount to frame bolt as the Chevy mounts use 3 bolts each and bop mounts only use 2 each. Also you'll need different through bolts(bolts that hold the clamshell to the frame mount) as Chevy uses longer ones

 

[AlabamaHit]

I sorry I don't really understand what you meant there bro.
The link to ebay is that the right Solid mounts for the frame? I decided to not use the anchor ones I posted on the first post because I don't want to have to fight to change them later on.
I'm going to a junk yard this week to try to find Motor side mounts.

 

[L67ss]

Where it bolts to the frame and what holds the motor to them

 

[AlabamaHit]

Is this the right stuff?
Motor Side -> http://www.ebay.com/itm/SBC-Small-B...id=100005&rk=3&rkt=6&mehot=pp&sd=190499451328

Frame side -> http://www.ebay.com/itm/Small-Block...ash=item2c5aa6f1c0:g:uTMAAOSw6EhUPGhJ&vxp=mtr

 

[L67ss]

Looks right. Are you gonna street drive?

 

[AlabamaHit]

Yup, just street. 350 I built is just stock other than bored .30.

Sucks I have to buy the engine side new because no junk yard here has them.