I had swapped my a/c to r134a some years ago. I knew then that the compressor was failing. Last year I replaced the compressor, vacd the system and refilled it. All was well until a seal in the new compressor failed. I replaced the expansion valve and receiver/dryer at that time.
I just re replaced the compressor under warranty, and I now am not getting ice cold air. I do not remember what it was putting out last year, but it was pretty cold. Yesterday on a ~70* day I was seeing ~60* at the center vent outlet. The compressor is cycling 45 psi on 25 psi off as it should, and it has quite a bit of Freon in it. Any ideas where my issue may lie?
I just re replaced the compressor under warranty, and I now am not getting ice cold air. I do not remember what it was putting out last year, but it was pretty cold. Yesterday on a ~70* day I was seeing ~60* at the center vent outlet. The compressor is cycling 45 psi on 25 psi off as it should, and it has quite a bit of Freon in it. Any ideas where my issue may lie?