Re: crucial118's 86 Cutty Salon build
Not yet, too broke. Looking for someone to fit rust on t tops first.
Not yet, too broke. Looking for someone to fit rust on t tops first.
Crucial118's 86 Cutty Salon 307->350->406->(TURBO) Build
- Thread starter crucial118
- Start date
- Status
Re: crucial118's 86 Cutty Salon build
Got started on the hot side today. Bought some sbc tri-shorty corvette header off ebay(http://www.ebay.com/itm/350889795907?ss ... 1439.l2649). They didn't want to work with my tall valve cover's(especially the driver's side), so I had to go to the junkyard to find some stock center-bolt valve covers. Which I didn't think would work, until I cut the insides out. This also should help with my valve cover leak, due to the shitty design of the afr eliminator lower perimeter bolt holes. Turned out real good.
Got started on the hot side today. Bought some sbc tri-shorty corvette header off ebay(http://www.ebay.com/itm/350889795907?ss ... 1439.l2649). They didn't want to work with my tall valve cover's(especially the driver's side), so I had to go to the junkyard to find some stock center-bolt valve covers. Which I didn't think would work, until I cut the insides out. This also should help with my valve cover leak, due to the shitty design of the afr eliminator lower perimeter bolt holes. Turned out real good.
Attachments
Re: crucial118's 86 Cutty Salon build
Nice work, I will be bring my engine to you when you are done with yours.
Nice work, I will be bring my engine to you when you are done with yours.
Re: crucial118's Transformation 86 Cutty Salon build
In the meantime I found a good place for the -10 AN oil return, in the fuel pump block off plate. Really didn't want to lift the engine to drop the oil pan to drill and tap.
They're coming...eventually.hurst1979olds said:
In the meantime I found a good place for the -10 AN oil return, in the fuel pump block off plate. Really didn't want to lift the engine to drop the oil pan to drill and tap.Attachments
- Status
Similar threads
