hey guys and gals. i want to run electric fans this year,my question is does anyone no where to get a aluminum shroud for the fans.or anyone selling the shroud with fans already.
electric fans
- Thread starter wonderboy24
- Start date
- Status
I've run the Summit Brand aluminum fans shrouds with good luck.
http://www.summitracing.com/search/depa ... ord=shroud
http://www.summitracing.com/search/depa ... ord=shroud
I have these after going through a few different electric fan options. They pull a LOT of air.
The shroud though is made from steel, not aluminum and is a little on the heavy side compared to say a stock F-body plastic setup.
http://www.summitracing.com/parts/der-16927/overview/
The shroud though is made from steel, not aluminum and is a little on the heavy side compared to say a stock F-body plastic setup.
http://www.summitracing.com/parts/der-16927/overview/
I had thise. Sounds like 2 jet engines. Lol. The flaps are nice. I bailed on that and put in a 96 cobra fan. Saved alot of weight and cools just as good
i tried really hard to make my own shroud from an aluminum road sign but when i went to bend the stuff it just cracked,an it's a little to thick too .As for a dual fan set up CHEAP 20.00 i used a 2001 Oldsmobile Alero fans with light mod to make it work,There are other fans that will work
Check this out viewtopic.php?f=5&t=27744
Check this out viewtopic.php?f=5&t=27744
pontiacgp said:FE3X CLONE said:
I like that they have flaps to let the air through when the fans are not on...
Hey that's the same style i was copying from when i tried to make my own from road sign,it's just too thick an cracks
- Status
Similar threads
