A good and solid cross-thread beats Loctite....
(Esp if it's stainless)
Tighten it till it starts to strip, then back it off a 1/4 turn.
Coat hanger and zip ties are OEM equivalent fasteners
These are the rules as I learned them by buying other peoples junk.....😀
(Esp if it's stainless)
Tighten it till it starts to strip, then back it off a 1/4 turn.
Coat hanger and zip ties are OEM equivalent fasteners
These are the rules as I learned them by buying other peoples junk.....😀