Monte SS budget build
- Thread starter youngdeezy
- Start date
- Status
86_olds said:
well like i said before i lean more towards the holley side when it comes to carbs but i got this setup as a deal together. its a 750cfm and a little to much for what i need. i found a guy on craigslist who was going to trade me his edel 1406 electric carb but as we all know whenever your dealing with craigslist, dreamers and the fakes come out....in other words the guy never came by for the deal. i know the basic tuning of a carb but im not to sure whats the difference of electric vs manual so if anyway knows educate me please
******************************************************************************************************************************************************
Chris thats whats up my boy the line up is looking good right now, were on are way! 1 of you should drop a youtube vid with the lineup for the whole world to see!
my new desktop BG
i need a monte carlo console lid...if anyone has 1 feel free to post it in here or pm me thanks. if i cant find an old stock 1 i guess i'll go with this because i have the red dash insert already.
ill hit mel up or warren and have one of them do ityoungdeezy said:86_olds said:
well like i said before i lean more towards the holley side when it comes to carbs but i got this setup as a deal together. its a 750cfm and a little to much for what i need. i found a guy on craigslist who was going to trade me his edel 1406 electric carb but as we all know whenever your dealing with craigslist, dreamers and the fakes come out....in other words the guy never came by for the deal. i know the basic tuning of a carb but im not to sure whats the difference of electric vs manual so if anyway knows educate me please
******************************************************************************************************************************************************
Chris thats whats up my boy the line up is looking good right now, were on are way! 1 of you should drop a youtube vid with the lineup for the whole world to see!
my new desktop BG
youngdeezy said:i need a monte carlo console lid...if anyone has 1 feel free to post it in here or pm me thanks. if i cant find an old stock 1 i guess i'll go with this because i have the red dash insert already.
Check on www.mikesmontes.com
kuruption109 said:ill hit mel up or warren and have one of them do ityoungdeezy said:Chris thats whats up my boy the line up is looking good right now, were on are way! 1 of you should drop a youtube vid with the lineup for the whole world to see!
my new desktop BG
Like makeup, I got it all covered. I just need some short vid clips of everybody's ride and I can make it happen. Man you passed me right up with this build. I need to get on BS2.0... My plan is to bring it home soon and store the Nova until I widen my driveway. The monte is looking SSweet!!
Qdub thanks my boy, I guess that's what I'm going to have to do to get that lid.
@ElcoMel on the YouTube clip stuff I need to send u a old short vid I had of the cutty riding down the block. oh and on brown sug you good that combo of you & chris is like lighting speed when y'all not playin around but Im glad you noticed how I'm moving with this project.....interior wise it's falling together quickly
@ElcoMel on the YouTube clip stuff I need to send u a old short vid I had of the cutty riding down the block. oh and on brown sug you good that combo of you & chris is like lighting speed when y'all not playin around but Im glad you noticed how I'm moving with this project.....interior wise it's falling together quickly
86_olds said:
If I keep this 750cfm carb, edelbrock sales an electric choke conversion kit for $50.
Over the weekend i got a couple other things done to the monte, lets see.
Before shots of the engine, man the exhaust manifolds looked pretty bad with all the rust and pitting on them
i broke out a piece of 60 grit sand paper and sanded them for a good 2 mins just to smooth the surface a little bit.
Budget build so no sending parts to get powder coated, this time it just a quick rattle can job but it looks better now so its all good.
accessories and fan painted
i picked a the water neck too, i need a little chrome :lol:
Before shots of the engine, man the exhaust manifolds looked pretty bad with all the rust and pitting on them
youngdeezy said:
i broke out a piece of 60 grit sand paper and sanded them for a good 2 mins just to smooth the surface a little bit.
Budget build so no sending parts to get powder coated, this time it just a quick rattle can job but it looks better now so its all good.
accessories and fan painted
i picked a the water neck too, i need a little chrome :lol:
- Status
Similar threads
